Fixed LiDAR elevation display not updating after vertical CRS change

Fixed an issue where batch importing many lidar files was significantly slower than in previous versions due to per-file draw mode recalculations during load.

Fixed an issue where breaklines created from guided extraction for edges on lidar data have incorrect per-vertex elevations

Fixed an issue where Manual Classification has incorrect warning occur when selecting from path profile that does not display all points

Fixed issue with slightly different results between runs when creating a RGB color grid from a Lidar point cloud.

Fixed paste of Lidar to new layer when the Lidar layer coordinate reference system is different than the current workspace coordinate reference system.

Fixed NDVI and NDWI shader display issues in 26.2.0-26.2.1.

NDVI and NDWI draw modes are now available for LiDAR point clouds containing NIR data.

The group check states are now remembered for the lidar stats

Fixed an issue in the lidar stats where MODE_ELEV shows up as an option but is not added to attributes

Changed the pop up for the calculate lidar stats in selected areas feature to only show the selected statistics

Fixed an issue where calculate lidar stats was operating over all points in the overall area of multiple selected features as opposed to just the selected feature areas individually

Fixed wording in the pop up for updating lidar statistics for area features

Added support for reading and writing LAS / LAZ v1.5 format files. This includes internal support for offset GPS times for more precision.

Fixed issue where Color by Segment draw mode did not appear after running APCA or spectral classification.

Elevation range is now loaded correctly when multiple layers are present.

Fixed option to 'Color Elevations Based on Visible Elevation Values' for Lidar which didn't work in 26.2.

LiDAR files where all Z values are identical now load without error.

Fixed issue where LiDAR draw mode dropdown showed limited options after opening a workspace with LiDAR data.

The Filter LiDAR dialog now correctly retains points above the specified elevation threshold.

Improved pole extraction to detect more pole points using RANSAC cylinder fitting with configurable parameters.

Fixed issue in path profile tool that could result in a slowdown if your path contained a large amount of lidar points

Fixed freeze/crash when opening a path profile during LiDAR classification.

LiDAR vegetation analysis using the Grid method now produces correct results.

Elevation filter settings are now preserved when switching between draw modes.

Fixed an issue where the Digitizer Toolset doesn't recognize lidar as being loaded if the user selects an area first

High and low vegetation class colors have been swapped

Moved Lidar/Terrain Display Options from Lidar Analysis menu to Tools menu for easier access

Fixed clipping polygon issues with classification, spectral partitioning and variogram dialogs.

Fix behavior of MCC ground classification to be consistent for different bin size units with equivalent values

Fixed extra field filter sliders showing raw integer ranges instead of scaled values

User Data point filter values are now calculated immediately when data is loaded.

A warning is now shown when loading data that is currently hidden by active view option filters.

Point filter minimum and maximum values now update immediately after a reset.

The scan angle filter range now updates correctly when toggling the absolute value option.

Pressing Enter after entering a filter value now applies the filter immediately.

View Options settings now stay in sync with changes made in the Configuration dialog.

LiDAR display option sliders no longer flicker when files are added or removed.

Applying live filters to LiDAR data no longer causes unintended changes to point cloud appearance.

Fixed issue that could cause 3d points and lidar points to be offset from each other if they had the same x,y,z values

Allow using middle mouse button to drag embedded map views around, like on the Image Rectification and Lidar QA / QC dialogs.

Updated 'LIDAR POINT COUNT' metadata item for point cloud layers to separate out the number of points marked as deleted.

Added new Lidar draw mode to color by User Data field.

PLS-CADD lidar imports now recognize an additional class string for classified building points

Added a new Voronoi Density Measurement tool for calculating horizontal lidar point density based on Voronoi cell sizes.

Building roof plane extraction quality has been improved.

Significant updates to the Lidar QA/QC tool allowing matching XY and Z components of control points against associated points in the cloud. Both Z-only and fully 3D transformations are now available.

Improved point cloud classifications when running ground, pole, and powerline classifications together.

Updated the calculation of Lidar statistics for a selection of Lidar points to include information about the avg/std dev/max above and below points relative to the best-fit plane.

Improved reading of compound coordinate reference systems from WKT PRJ files / strings.

Added Lidar Strip Alignment tool for easily adjusting one Lidar strip / flight line to match another.

Significantly improved the performance of building and vegetation classification using the segmentation method for mixed density point clouds, including terrestrial lidar.

Added the ability to identify flight lines in a point cloud by gaps in GPS time. New tool under Lidar Analysis menu.

Fixed error on Pixels to Points Ground Control Points dialog when initializing control point list on images that don't initially have relative altitude information.

Removing unused input datum combo box for P2P wizard since it is always assumed to be WGS84.

Ensure load of ground control points from a text file in Pixels to Points only allows the 'Point Only' import option.

Updated Ground Control Point dialog in Pixels to Points (P2P) so that selecting a new image will automatically put you in 'Add Control Point to Image' mode if there is not already a known location for the selected control point on the image.

Corrected direction of 3D View pivot axes.

Fixed lockup in 3D view with online data in 26.2.0 release.

Fixed issue in path profile tool that could result in a slowdown if your path contained a large amount of lidar points

Fixed issue where exporting path profile cross profiles to SHP format wouldn't let you cancel the process

Fixed an issue where the Path Profile menus disappear when docking path profile

Fixed text encoding when tracing water flow from/to lines and point features with non-ASCII text in attribute values.

Fixed an issue where the elevation legend displayed the shader for the first layer in the Control Center rather than the last layer drawn.

Fixed issues with density grid shading.

Fixed an issue where the elevation legend would disappear when lidar draw mode was not set to Color by Elevation and no lidar data was loaded.

Fixed issues with rendering terrain clamped to elevation in bounds when a layer is displayed in its entirety.

Fixed an issue where custom unit text was not applied to the elevation legend.

Fixed NDVI/NDWI draw modes persisting after NIR data is unloaded

Elevation Legend now correctly respects the Configuration > Display Options > Elevation Legend unit preference when streaming USGS 3DEP elevation data.

Fixed bug when restoring default elevation range values on the Alter Elevations tab of the Options dialog for a point cloud layer.

Fixed NDVI/NDWI shaders scaling to data extent instead of fixed [-1, 1] range

Added new options to the Water Level Rise calculation for flood layer ranges and an animation of the result

The Variogram Map Show Plot option now responds correctly on the first click.

The elevation legend now displays correctly when the layer shader differs from the workspace shader.

Moved Lidar/Terrain Display Options from Lidar Analysis menu to Tools menu for easier access

The named animation has been added with the name entered in the Animation option in the Solar Analysis tool. The group name of the layers added to the view will have the name "Shadow Mask - [Name Entered in the Animation Option]"

Density grids can now be enabled simultaneously with the vector points used to create them.

Pressing Enter after entering a filter value now applies the filter immediately.

LiDAR display option sliders no longer flicker when files are added or removed.

Prompt user to run ILE tools with CPU-only setting if it fails using the GPU.

Terrain Paint Along and Across Line using Selected Features brush was incorrectly processing selected area and point features.

Watershed flow lines from selected points are now created in a different layer than the stream network.

Fixed an issue where bright, saturated pixels were incorrectly labeled as Unknown, causing holes in buildings and high-reflectance areas. The model now distinguishes true NoData regions from saturated pixels, improving classification accuracy. Note: this adds a small amount of post-processing time.

The Setup Vectorize dialog now supports resize for the purpose of resizing the Color Matching Preview area

Polygon regularization now correctly processes features with complex interior geometries.

A redesigned Viewshed tool, including new options for optimizing transmitter placement and height on terrain data.

Fixed terrain paint fill gaps issues.

Added the option to vectorize slope raster based on percentage

The progress indicator now remains visible during triangulation method grid generation.

Kriging grid generation now works correctly after switching between projected and geodetic coordinate systems.

A new guided breakline drawing tool that snaps to terrain features based on user-placed seed points.

Fixed issue with some lines along edge of area features not being selected when selecting all lines in area features.

Fixed the default dialog width of the Digitizer Toolset to not obscure the Spatial Operations tool

Fixed an issue in the Digitizer Toolset where the leftmost button doesn't work if the user clicks the left side of the button

Fixed an issue where the hover tooltips don't fade when hovering the mouse between buttons in the Digitizer Toolset

Fixed MEASURE Display Feature Measurements not adding attributes

Improved parallel line tools handling of sharp angles

Removed unnecessary requirement for a coordinate transformation when inserting Pad Site template layers.

The Vectorize Raster tool in the Digitizer toolbar now deselects when the dialog is closed.

Fixed Create Grid workflow not allowing the selection of "All loaded data" for bounds

Fixed issue were auto styling of features may not apply to existing created features when the style is changed to the default unknown feature style.

Corrected calculation of average value for styling features by attribute values on Styles tabs of Options dialogs for vector layers when duplicate values are present.

Fixed Vector feature type filters that were not working in 26.2.0-26.2.1.

Fixed display of non-ANSI characters on Styles tabs of layer options dialog from layers not in UTF-8.

Fixed attributes are being hidden when a new one is created

Fixed an issue where the "update feature attribute order" button would make it so the attribute editor would not remember the attribute order

Case sensitivity is removed from the cases outlined in the description

Added the option for the user to add multiple attributes with "Add coordinates/bounds attributes to selected features"

Show user prompts when running a script from the script dialog.

Cesium 3D is now supported by the script builder and GMS

LIDAR_AUTO_FIT now correctly processes point clouds when the workspace coordinate reference system differs from the point cloud coordinate reference system.

Elevation Legend now correctly respects the Configuration > Display Options > Elevation Legend unit preference when streaming USGS 3DEP elevation data.

Updated TCarta Global Marine Basemap to account for changes from source host

Significantly sped up LAS / LAZ export when reprojecting data.

Fixed gridding of Lidar using the Kriging method when the data is reprojected.

Fixed certain LAZ exports attaching the wrong coordinate reference system data to the file

Fix an issue with the Hellenic Grid transformation that was causing it to fail when applied in reverse.

Show the current (potentially customized) vertical unit details when displaying info.

Removed unnecessary requirement for a coordinate transformation when inserting Pad Site template layers.

Make load of PRJ files more consistent between loading from string versus from file.

Added the ability to edit object definitions to the Configuration dialog's Coordinate Reference System/Select Coordinate System tab.

EPSG codes have been added to the Coordinate Reference System display.

Coordinate Reference System for NSIDC Geotiffs now imports correctly.

Duplicate transformation pickers no longer appear when exporting to DTED when Auto Pick is turned off.

GeoTIFF exports will now include a vertical, if present.

Fixed an issue where running Deep learning tools with GeoCalc caused GlobalMapper to close unexpectedly.

Coordinate Transformations have been optimized and threaded to improve speed.

Improving autopick logic and the order in which we attempt to find an applicable transform.

Coordinate transformations are now saved in newly made GMW layers.

Fixed DWG export from Global Mapper units bug. The resulting file always had 'Feet' $MEASUREMENT flag, which incorrectly scaled in metric Civil3D drawing.

Added attributes to the GCP file export for RMSE_X and RMSE_Y with the respective values for each point. Also, an RMSE_Z attribute is added to GCP options with 3D transforms

Added new script parameter FORCE_FULL_PROJ for IMPORT commands to specify that all coordinate conversions for the layer should do the full calculations rather than using a mesh.

Apply vertical transformations dynamically between layers with different known vertical coordinate systems. This includes on the Feature Info dialog and analysis operations.

Adding the ability to set an epoch date on a layer as well as to set a global epoch date, and to select time-based transforms to perform the required conversion.

Azimuthal Equidistant Projection logic has been updated to match current industry standards and to fully implement ellipsoidal math when needed.

Significantly sped up LAS / LAZ export when reprojecting data.

Fixed an issue where batch importing many lidar files was significantly slower than in previous versions due to per-file draw mode recalculations during load.

Improved E57 cloud import, including fixing issues with the scan filter and improving progress and gridding.

Fixed issue with Last Exported Bounds option for export not being updated if you never activated the Export Bounds tab on the previous export.

Fixed issues with ECW/JP2 alpha channels when more than 4 data bands are present.

Fixed errors rendering some JP2 files when zoomed out a bit.

Added support for XMP metadata stored using <x:xmpmeta> tag.

Fixed load of GGF geoid grid files with 16-bit samples.

Improved speed of initial load of vector data that was a bit slower in 26.2.

Fixed issues with workspaces and GMP files containing vector line or point features saved in 26.2.0-26.2.1 loading with errors in earlier versions of GM.

Fixed multi-band image format exports from 8-bit per pixel and grid layers in 26.2.0-26.2.1.

Changed XYZ Grid export dialog to use row-major order by default and to save all settings between runs.

Fixed issue where S57 files saved to a workspace could be duplicated when loaded

Fixed issue with loss of precision when loading certain OBJ files

Fixed issue with non-transparent ECW exports with invalid regions in 26.2.0-26.2.1.

ECW files with Korean names will now load in Korean GM.

Allow loading truncated USGS DEM format files rather than just failing if any data is missing.

Added support for additional XMP data fields when loading picture point images.

Added Cesium 3D Embed Texture export option.

Added a checkbox to create Cesium 3D tile for exporting PNG or JPEG raster formats

Corrected visibility issue with Generate PRJ File option in 3D Export property page.

PLS-CADD lidar imports now recognize an additional class string for classified building points

Fixed DWG/DXF Import so that the label text no longer contains invalid "ol" characters.

GeoTIFF exports will now include a vertical, if present.

Fixed issue were DBF border color attribute wouldn't be used on shapefile load

When exporting to DXF and DWG, allow user to force areas to be exported as polylines.

Added multi-line AcDbMText support to dwg/dxf export for feature areas with multi-line labels.

Fixed DWG export from Global Mapper units bug. The resulting file always had 'Feet' $MEASUREMENT flag, which incorrectly scaled in metric Civil3D drawing.

Fixed incorrect behavior in some cases exporting large vector data sets to a raster format while both tiling and cropping to the same area feature(s).

Corrected multi-band export defaults when non-black background color is used.

Elevation values are no longer assigned during 2D DXF/DWG imports

Added support for exporting Trimble GGF geoid grid format files.

Added support for exporting loaded point cloud data to the E57 format.

Fixed issue with font changes to default feature type styles not saving between runs if no other (non-font) style changes are made.

Fixed issues using attribute values with non-ASCII characters when styling by attributes.

EPSG codes have been added to the Coordinate Reference System display.

Vectorized s52 point symbols

Fixed errors rendering some JP2 files when zoomed out a bit.

LiDAR toolbar buttons remain visible when the draw mode dropdown contains longer text.

Increased precision displayed for 'No Data Distance' value above slider when creating a TIN grid.

Fixed an issue where the elevation legend would disappear when lidar draw mode was not set to Color by Elevation and no lidar data was loaded.

Fixed load of GGF geoid grid files with 16-bit samples.

Fixed issues with degree symbol display on the status bar.

Fixed duplicate code page parameter warning when opening workspace

Batch terrain import performance has been restored to expected speeds.

Fixed an issue where custom unit text was not applied to the elevation legend.

Fixed an issue in the Digitizer Toolset where the leftmost button doesn't work if the user clicks the left side of the button

Fixed issue with the Live Lidar / Terrain Filter Slider dialog showing up too large.

Fixed NDVI/NDWI shaders scaling to data extent instead of fixed [-1, 1] range

Fixed an issue where multiple shortcuts are added when a folder has the same name as a zip folder

Fixed the 'e' in workspace being cut off in the 'Display Only Top...' option in the Animate Layers Toolset

A display anomaly has been fixed where layers that are not animated are getting hidden with Only Display Layers in Selected Animation Set checked

fixed case where border styles were lost when saving an auto styled area feature

The code page option should now be saved as part of the import options

Added support for additional XMP data fields when loading picture point images.

Improve behavior when a system cannot display and embedded Edge browser control. Any error is now displayed in place of the browser control.

Fixed rare issue that prevented Global Mapper 26.2 from starting on some machines.

Updated the name of Macedonia to North Macedonia in the default dataset

Fixed crash loading some GMP files with multiple Lidar layers in 26.2.0 release.

Added reseller contact information to language versions maintenance and support popups

Fixed animation state changes affecting visibility of layers while the animation is not playing

A new land cover classification model that is best suited for imagery from coastal chaparral areas.

A new land cover classification model that is best suited for imagery from desert, semi-arid, or low-precipitation areas.

support added to allow settings on more than one label layer can be changed at the same time

Fixed reset of workspace coordinate reference system when creating a new multi-band layer from loaded layers in a different coordinate reference system.

Added an option to refresh the Built-in Model list for Insight and Learning Engine settings via right click

Added a Match confidence attribute for each detected vehicle and building feature in the ILE Object Detection tool. Match is presented as easy-to-understand ranges: Potential (0–33%), Likely (33–66%), and Confident (66%+), providing a clearer indication of detection quality.

Fixed duplicate Fine-Tuning dialogs opening on repeated button presses

Fixed duplicate Object Detection dialogs opening on repeated button presses

Fixed duplicate Land Cover Classification dialogs opening on repeated button presses

Made the create rectangle/square brush option the only one available for vehicle detection training data creation.

Auto styled area features saved to a workspace will now have the same border colors

fixed text clipping issue that could happen on the Insight and learning engine dialog

Removed unnecessary options from Training Data Generation Options for building extraction.

Improved the way users can reorder layers in the fine-tuning step by adding "up and down" arrows. The "drag and drop" option can still be used for reordering the layers.

New connections should now work without the need for recreation.

Fixed an issue where running Deep learning tools with GeoCalc caused GlobalMapper to close unexpectedly.

Added script support for Deep Learning inference tools, including Land Cover Classification, Building Extraction, and Vehicle Detection.

Mesh Cropper tool supports arbitrary cropping polygons

Vectorized s52 point symbols

Added support for slope direction shaders in the vectorizer and equal value area tools.

Added a splash screen when Global Mapper is opened

Fixed issue with the maximum Grid "No Data" Distance when gridding Lidar and using 3D area/line features as breaklines

Fixed issues performing Lidar best fit point cloud when cloud units aren't meters or are in different projections.

Fixed issues with odd tiling effects in Lidar height-above-ground display.

Pressing Escape to clear point selection no longer locks up the Manual Classification tool.

Fixed max likelihood noise classification for tiled classification.

Fixed Point Type selection for vegetation Auto Feature Extraction

Made Restore Defaults button on Config dialog also restore default Lidar class names and colors.

"Keep Classifying as Points are Selected" now turns off after closing the Manual Classification Toolset

Ensure the reported LIDAR_ELEV for each control point in the Lidar QC process is consistent regardless of the max search distance.

Added two new script parameters (LIDAR_VEG_SIMPLIFY and LIDAR_VEG_THRESHOLD) to better replicate the the vegetation extraction preformed in the GUI

Fixed script builder error when using Lidar Thin "mark thinned points deleted"

Fixed issues with Lidar QC not finding any nearby Lidar points if none of the points in the cloud are marked as a first, last, or unknown point.

The Manual Classification toolbar will not enable itself when the user licenses pro.

Added an "All Loaded Point Cloud Layers" option to the Manual Classification Dialog.

Added new "Unclassified" button to Path Profile toolbar

P2P Wizard will show a warning if the required memory estimate exceeds the available resources.

In GC Mode, update the P2P Wizard to require users to select an appropriate coordinate transformation if they have selected a new output projection that requires one. This coord transform will be displayed beneath the output projection on the dialog.

Update the P2P Wizard to set the default output projection based on the following: If the global projection has not been changed from default, or a default projection is not being used, and no data was previously loaded in the control center, then the wizard should initialize in UTM. Otherwise GM will use the current global as the output projection, unless the current global is geographic (lat, lon), in which case GM will also use the appropriate UTM. The Output Projection will always be displayed in the dialog.

Up to 4 separate layers will be created if the user requests Sparse PC in the "P2P Additional Outputs" options

Fixed an issue where the Crop to Selected Area Feature(s) option in the ILE inference tools Bounds dialog was incorrectly disabled. The option now activates as expected when an area feature is selected, allowing users to crop detections to their chosen area.

Fixed an issue where specifying bounds with ILE tools failed when the global projection was set to a geodetic CRS. The tools now handle geodetic CRS correctly, and the Bounds workflow behaves consistently with other coordinate systems.

Fixed lockup performing vehicle detection on some machines.

Suppressed unnecessary pop-up messages when no past experiments are available. Added a warning message when the AIToolLogs folder is not empty but contains no relevant past experiments.

Added the ability for users to delete custom models from the library of models.

Added the ability to import custom models previously exported from Global Mapper, automatically extracting all necessary files for use in the Custom Models inference process.

Added the ability to export custom models from Global Mapper, including all components needed for import on another machine.

Reorganized Training Data Generation window and added button to safely close

Fixed an issue where the Close button in the training dialog remains disabled after an expected error message pop-up, ensuring the dialog can now be closed directly.

Added a Bounds tab to the Insight and Learning Engine (ILE) inference tools, providing spatial restriction options consistent with those available in other tools.

Disabled the X button during inference to prevent crashes, re-enabling it after completion for all inference dialogs.

Change "flat" 3D features (those that have no defined elevation), which are both selected and feature info selected, to render as the latter.

The path profile tool will now correctly show lidar layers added after a path is created without the path having to be recreated

"Keep all original vertices" setting on the perpendicular path profile settings dialog now remembers its state

Added new "Unclassified" button to Path Profile toolbar

Updated path profile "Draw 3D Point Features in Path Corridor" option to create a corridor when one isn't present

Fixed issue where path profile spacing values saved to a workspace wasn't being imported back in correctly

Fixed a case in path profile tool where elevation values outside of the corridor bounds could be used when using "Keep Maximum Elevation along Perpendicular" option in raster layers with large pixel cells.

Fixed issue with Control Center title initially showing the wrong loaded layer count.

Fixed error in breakline generation when GeoCalc projection mode is enabled.

Fixed issue with the maximum Grid "No Data" Distance when gridding Lidar and using 3D area/line features as breaklines.

Fixed issue with the Image Painting tool not setting a single pixel on the right or bottom edge of an image.

Fixed crash error doing extremely large mesh-from-layer (over 1 billion samples) operation.

Fixed alignment issues when creating a mesh from some terrain surfaces.

Fixed issues saving GMW / GMP files with vector feature data over 4GB in size.

Fixed lockup performing vehicle detection on some machines.

Fixed issue with path profile where resampled lines wouldn't be the exact spacing selected with the sample spacing

Fixed errors performing cut-and-fill volume along exactly vertical or horizontal lines.

Fixed issues with dissolving features in Spatial Operations when the display projection was different than the layer projection.

Improved count of overlapping layers when online or large layers are involved to reduce memory usage and improve error reporting.

fixed case where 3D points in path profile view were reading relative elevation values as absolute elevation

Corrected an issue running object detection on cropped imagery

Improved generation of non-overlapping contouring areas

Ensure GENERATE_WATERSHED and GENERATE_RIDGE_LINES script commands use same bounding box logic as the same commands in the user interface.

Added message about how many features were updated when adding style attributes.

Made move of select point features to nearest line feature be an Undo-able operation.

Fixed creation of buffer areas when assigning to an existing layer with a different projection than the feature(s) being buffered.

Fixed whisker line creation when selected point layer projection is different than the display projection.

Fixed 'Create new point/text feature at specified bearing/distance' when display projection is different than projection of layer the selected point is in.

Fixed issue when creating parallel lines they would be created with the incorrect projection

Allow launching Quick Point Creator from menu even if Digitizer Tool is not active.

Fixed parallel line tool crash with the per-vertex elevations option

Ensure 'MOVE VTX' cursor shows when the Join Vertices option is active in the Digitizer Tool.

The advanced selection dropdown now shows its list on a single click

After undoing a vertex move, the vertex now remains selected and the Move Selected Vertices command remains active

The default height of the Digitizer Toolset is now tall enough to show all the sections

The parallel line tool now lets the user know how many lines couldn't be created

Fixed an issue where the dialog dividing resizer was visible in the Digitizer Toolset

The Move Selected Vertices button is now highlighted instead of the Move Selected Feature(s) button when it is in use

Improved the self intersecting line tool for some datasets with very small line segments

Improved parallel line creation for complex lines with sharp curves

Added the ability to undo modifications made by the line intersection tool

Improved the edge of buffers from very large areas/lines to maintain the Great Circle distance to the edges.

Made attribute operations undo-able from Attribute Editor.

Made Attribute Calculator operations be undo-able.

Fixed some descriptions for Attribute Calculator commands showing the wrong information

Fixed batch geocoding file not converting to the proper code page and added the ability for the user to set the code page of an incoming text file.

Fixed issue with incorrect degree symbol in coverage/bounds layer created when finding polygonal bounds.

The "Default Layer Attribute Label Format Options" have been added to Configuration > Vector Display > Labels. New Layers will take these options by default.

Fixed script builder crash caused by SHOW_3D_VIEW

Fixed issues with gaps in large generated elevation grids from streaming Lidar (Entwine) services.

Added two new script parameters (LIDAR_VEG_SIMPLIFY and LIDAR_VEG_THRESHOLD) to better replicate the the vegetation extraction preformed in the GUI

Fixed case were script editor new temporary tab wouldn't get a style applied

Fixed script builder error when using Lidar Thin "mark thinned points deleted"

Fixed issue were swapping tabs could start to drag the tab around instead of just selecting it

Added STYLE_ONLY option to xyz export for EXPORT_ATTRS

Updated the look of the script editor bookmark symbol to a blue arrow

Fixed spatial scripting stack trace when attempting to insert a layer when nothing is selected

Added missing tooltip on Favorite Script Manager

Closing a temp file in the script builder will no longer prompt you to save if its empty

IMPORT_ARCHIVE now checks all subdirectories for wildcard files

Ensure GENERATE_WATERSHED and GENERATE_RIDGE_LINES script commands use same bounding box logic as the same commands in the user interface.

Fixed issues downloading WFS data that requires a namespace in the URL.

Fixed crash error with Online Source Download when pressing Enter/Next with no source selected.

Updated FEMA Hazard online sources to new service

Fixed connection to online WMTS sources that were not displaying visibly

Fixed a bug on loading WMS sources with multiple layers

Restored French cache IGN online sources, now connecting to Géoplateforme source

Fixed issues retrieving layer list from some WMS and WFS sources that don't like an extra `ServiceName` parameter.

Fixed issues accessing ESRI Feature Services that required authorization.

Created a more appropriate dialog message for projection/transformation errors

Fixed initial size of Tools -> Coordinate Convertor dialog on high DPI monitors.

Updated using a coordinate transform to shift a layer to expect values in the current display projection, rather than the native layer projection.

Fixed flipped datum and GCS EPSG codes for PNG94 and RDN2008 datums.

Fix issue in GeoCalc mode so that Canadian NTV2 transforms will be available in the Transform Picker even if their grid files are not currently downloaded, so long as they pass a more broad Area of Use check.

In GC Mode, when choosing the Projection during a rectification, correctly update the global if the user chooses to do so.

In GC Mode, saved workspaces containing vertical coordinate systems and transforms should not force a re-select on load.

In GeoCalc Mode, when loading a workspace where the stored coordinate transformation relies on grid files that are no longer present, attempt to automatically download the files, if possible.

In GC Mode, update the P2P Wizard to require users to select an appropriate coordinate transformation if they have selected a new output projection that requires one. This coord transform will be displayed beneath the output projection on the dialog.

Updated multi-band export to only require that at least one of the bands being exported has a valid value, rather than requiring all of them to be valid.

Fixed typo in the Generic text import dialog.

Fixed issues with RMaps SQLite exports being incorrect.

Fixed scaling issue related to Import images as Picture Point option.

Fixed errors exporting layers with non-ASCII characters in description to DWG files.

Added an error message pop-up to deny exporting Cesium 3D tiles in geodetic coordinates

Enabled support for exporting bounds in Cesium 3D export format.

Added support for importing TFADS-O (Table Formatted Aeronautical Data Set - Obstacles) format files.

Fixed issues with the load of some files when the GeoCalc projection mode was enabled.

Corrected an issue with LandXML where the last column of a grid was not being created

Updated CXF text alignment to 'Right (Baseline)' rather than 'Top Right'.

Show warning when loading DNG format files that we will show the preview image if the main image uses CFA compression.

Fixed error exporting ESRI spatial databases with SHAPE attributes.

Fixed the rotation angle for symbols loaded from CXF files.

Ensure 'is axis flipped' prompt for GML is shown for all potentially unknown geodetic projections.

Fixed errors exporting a CADRG file from a map catalog.

Allow resizing the batch conversion type selector dialog.

Added STYLE_ONLY option to xyz export for EXPORT_ATTRS

Fixed issues loading terrain TIFF files where the min/max value in the header is incorrectly specified as a single value.

Fixed issue in 26.0-26.1.0 with VTerrain BT imports not being able to automatically determining the coordinate system.

Fixed issue in 26.1.0 with loading data from .zip files with additional .zip files embedded.

Added DWG/DXF import support for AcDbMPolygons

Added additional warning to USGS DEM exports when the export datum is not an exact match to one supported by the USGS DEM format.

The , , and are now selectable in the "Include Feature Attributes Before Coordinate Data" dialog and their exports are controlled by their selections

Added error handling for unexpected PLY formats

Fixed a failure at attempt to export large (> 4G pixels) texture files

Fixed an issue with exporting meshes as Cesium 3D tiles with colored vertices.

Improved handling of proxy data for DXF and DWG CAD files

Fixed a rare issue with loading some PLY binary files

Y-axis input is now disabled when aspect ratio is preserved in the 3D print export dialog

Added warning when FBX export may crash due to memory requirements.

Fixed extra filename prompt and empty filename when printing to a file and choosing Microsoft Print to PDF as printer.

Added "Replace Feature Descriptions with Attributes" check-box option to KML export dialog

Updated ECW read / write to latest version. Now multi-band and transparent ECW exports are supported.

Added support for loading OpenStreetMap PBF format data.

Fixed issues with Arrow Elements in the Map Layout Editor when the main map is rotated.

Fixed display of North Arrows on rotated maps when Grid North is used for bearings.

Fixed issue with the 2D view getting locked after adding map insets in the Map Layout Editor (affects 26.1.0 - 26.1.2).

Fixed issues loading .gm_mapTemplate files created before GM 26.0 with non-English text.

Fixed behavior of Pan mode in Map Layout Editor.

Fixed stack trace error when dragging group of map elements in Map Layout Editor inside another group of elements.

Fixed typo in built-in map layout templates

Fixed upside-down display of Path Profile elements created in the Map Layout Editor.

In GC Mode, when choosing the Projection during a rectification, correctly update the global if the user chooses to do so.

The Animation Toolbar has been removed as it was replaced by the Animation Toolset.

Added missing tooltip on Favorite Script Manager

Fixed intermittent stack trace when making a combined ortho-image from several large images.

Fixed issue with undo of deleting features not being available if the initial delete features tip was shown.

Improved coordinate conversions using the RSO East Malaysia projection system.

Renamed 'Only Display Layers in Selected Animation Set' and fixed issue where non-animated layers are no longer drawn after an animation is saved is fixed.

Updated address search to use Azure Maps Geocoding by default as Bing Maps Geocoding has been discontinued.

Fixed issue in the Animate Layers Toolset Dialog related to the esc key.

Layer animations now display in the workspace.

The animated layer names in the Control Center now only flash when appropriate.

Fixed an issue related to the Digitizer and Manual Classification dialogs being docked in the Control Center together.

Enable tracking multiple GPS vessel locations at once via $GPWGT NMEA sentences.

.zip files are treated as files instead of folders in the File Browser

Files without extensions shown in the file browser can be opened in the File Browser.

The File Browser pane opens in the saved spot after subsequent runs, after sharing a docking frame

The drop down now expands smoothly while the pane width increases, and it is shrinkable to its original width

Files that don't have extensions are now visible in the browser in the "All Files" selection

The cursor now appears when the user drags over the main view in the File Browser

Subfolders are considered in the File Browser's ‘Hide Unsupported Files’ logic

Fixes an issue caused by undocking the File Broswer window.

Fixed errors adding 2D view and Path Profile map insets to Map Layout Editor.

Fixed the display of degree symbols in ASCII text file on the Text File Import dialog.

Update GC Mode import of LAS/LAZ files to handle WKT2 CRS information.

Ensure EPSG code at top of projection dialog reflects the current custom projection parameters.

Fixed issue in 26.1.0 with loading data from .zip files with additional .zip files embedded.

The auto back up file name logic is now based on existing auto backup files for each workspace using numbers from 1 to the user specified maximum number of auto backup files value.

Fixed and issue where the workspace backups were not automatically saving properly

Added parentheses in the "Column headers in first row of file (points/WKT only" labels for the checkboxes in the CSV and XLSX import dialogs.

The toolset dialogs' sizes can now be changed while in their default locations

Added new entry to command search for managing favorite scripts

The last placed / docked locations of the Digitizer Toolset and Manual Classification Dialogs is now remembered when the workspace is saved.

Double-clicking the workspace name once again opens the Projection config

Made feature delete and edit from Attribute Editor be undo-able.

New vector layers are created with the active codepage

Fixed script editor tollbar tooltip text