The following types serve general utility roles and in miscellaneous functions not part of the other categories. These types use fixed, numeric constants, which are defined here.
- globalmapper.GM_ChildLayerOp_t8
This type represents operations on a child layer
- Values:
- GM_ChildLayerOp_Load = 0
The child layer was just loaded
- GM_ChildLayerOp_Close = 1
The child layer was just closed
- GM_ChildLayerOp_DrawScaleChosen = 2
The draw scale for an online layer was chosen. Event data is sint32* with zoom scale number
- GM_ChildLayerOp_ExportScaleChosen = 3
The export scale for an online layer was chosen. Event data is sint32* with zoom scale number
- GM_ChildLayerOp_LocalTileMissing = 4
The tile for a local tile data set was missing. Event data is str with filename that was missing
- globalmapper.GM_DatumXForm_t32
This type represents the different available datum transformation methods
- Values:
- GM_Datum_Molodensky = 0
3-parameter Molodensky datum transformation
- GM_Datum_BursaWolfe = 1
7-parameter Bursa-Wolfe datum transformation
GM_Datum_NumXFormMethods = 2
- globalmapper.GM_Error_t32
Error codes
- Values:
GM_Error_None = 0
- GM_Error_InvalidLayer = 1
The provided layer is not open
- GM_Error_InvalidParam = 2
A parameter was invalid
- GM_Error_LoadError = 3
Unable to load layer
- GM_Error_MultipleLayers = 4
Multiple layers were found in the file being loaded (call GM_LoadLayerList instead)
- GM_Error_CollarSetup = 5
Unable to automatically crop the collar
- GM_Error_DrawError = 6
An unknown error occurred drawing the layer(s)
- GM_Error_ExportError = 7
An unknown error occurred exporting the layer(s)
- GM_Error_NothingToExport = 8
No data was available to export
- GM_Error_InvalidFormat = 9
An invalid export format was specified
- GM_Error_RectifyError = 10
An error occurred rectifying the image
- GM_Error_NotSupported = 11
The operation is not supported for the layer
- GM_Error_NotRegistered = 12
No registry key was found to enable this functionality
- GM_Error_NoDataAtLocation = 13
No data was found at the specified location
- GM_Error_OutOfMemory = 14
Not enough memory to complete the requested operation
- GM_Error_Projection = 15
An error occurred projecting a coordinate
- GM_Error_NoProjectionSet = 16
No view/export projection is currently set
- GM_Error_ViewShedCalc = 17
An error occurred performing the Viewshed analysis
- GM_Error_OperationCanceled = 18
The user canceled the operation
- GM_Error_OnlineConnect = 19
A connection to the online service could not be established
- GM_Error_OnlineUnknownSource = 20
No online source with the theme name provided could be found
- GM_Error_GenerateContours = 21
An error occurred generating the contours
- GM_Error_NotRasterLayer = 22
The layer provided is not a raster or elevation layer
- GM_Error_InvalidPackage = 23
The provided handle is not a valid package
- GM_Error_InvalidFeatureIndex = 24
There was no feature at the given index in the layer
- GM_Error_InvalidDrawStyle = 25
The drawing style passed in is not valid
- GM_Error_InvalidSymbolName = 26
The symbol name provided does not match any available point symbols
- GM_Error_SymbolAlreadyCreated = 27
The symbol name specified has already been added
- GM_Error_MissingFile = 28
The file specified could not be found
- GM_Error_GPSDataNotValid = 29
The GPS data requested does not currently have a valid value available
- GM_Error_GPSAlreadyTracking = 30
A GPS device is already being tracked, call GM_GPSStopTracking
- GM_Error_VolumeCalcFailed = 31
An error occurred calculating the volume
- GM_Error_InvalidHoleIndex = 32
The area does not have a hole at the index provided
- GM_Error_InvalidMapIndex = 33
There is no map at the given index in the map catalog
- GM_Error_3DNotOpen = 34
No 3D view window is currently open
- GM_Error_3DLibraryNotFound = 35
The ExternalViewerIntf.dll library was not found
- GM_Error_3DLibraryBadInterface = 36
The ExternalViewerIntf.dll library did not have the proper interface
- GM_Error_3DCreateError = 37
Unexpected error creating 3D view
- GM_Error_3DSetViewError = 38
Unexpected error setting 3D view
- GM_Error_NothingFound = 39
No features were found within the search area
- GM_Error_SearchError = 40
Unexpected search error
- GM_Error_LowMemory = 41
Some data was not drawn or loaded due to low available memory
- GM_Error_NotElevationLayer = 42
The layer provided is not an elevation layer
- GM_Error_FileAlreadyInCatalog = 43
The provided file was already in the map catalog to which it was being added.
- GM_Error_TypeAlreadyExists = 44
The provided type name was already used by an existing type
- GM_Error_DatumAlreadyExists = 45
A built-in datum with the given name already exists
- GM_Error_UnknownEllipsoid = 46
The ellipsoid name provided does not match a known ellipsoid
- GM_Error_GridError = 47
Error generating grid from 3D vector data
- GM_Error_InvalidShaderName = 48
The shader name provided was not found
- GM_Error_SymbolNotCustom = 49
The symbol name provided is not a custom one that can be deleted
- GM_Error_MGRSParseError = 50
Error parsing MGRS coordinate string
- GM_Error_CreateBufferError = 51
Error creating a buffer around a feature
- GM_Error_CopyrightedData = 52
The data attempting to be exported or fetched is copyrighted
- GM_Error_BrushAlreadyCreated = 53
A fill style with the provided name already exists
- GM_Error_BrushError = 54
An error was encountered adding the custom fill brush
- GM_Error_EllipsoidAlreadyExists = 55
An ellipsoid with the given name already exists
- GM_Error_CombineError = 56
An error occurred combining the areas
- GM_Error_SkippedEmpty = 57
Empty tile was skipped on export due to passing GM_ExportFlags_SkipEmpty
- GM_Error_NoFeatureElev = 58
The feature does not have a single elevation value (for lines and areas there may be per-vertex values)
- GM_Error_ArcGISNotLicensed = 59
Attempted to load an ArcGIS database, but there is no license for ArcGIS
- GM_Error_NotSupportedIn64BitBuild = 60
Attempted to use functionality that is not supported in a 64-bit build
- GM_Error_UnableToConnectToDB = 61
Unable to connect to the database using the input connection string
- GM_Error_Unspecified = 62
Generic unspecified error
- GM_Error_Script = 63
Error running script
- GM_Error_InvalidLidarPointIdx = 64
The Lidar point index is out of range
- GM_Error_NothingChanged = 65
Nothing was changed by the modification
- GM_Error_NotPaletteLayer = 66
The layer is not a palette-based layer
- GM_Error_NotImageLayer = 67
The layer does not contain color imagery
- GM_Error_InvalidBand = 68
The provided band was outside the range of bands for the layer
- GM_Error_NoElevationLayersLoaded = 69
There are no elevation layers currently loaded
- GM_Error_NoVectorLayersLoaded = 70
There are no vector layers currently loaded
- GM_Error_COAST = 71
Unspecified COAST processing error
- GM_Error_NoCOASTModelParmsLoaded = 72
No model parameter file is loaded
- GM_Error_RegistryOpFailed = 73
Error while reading or writing the registry
- GM_Error_InvalidCodePage = 74
The code page provided is not known
- GM_Error_InvalidLidarQuery = 75
The Lidar query that you passed in is not an active one
- GM_Error_LidarPointInQuery = 76
The Lidar point was already in the Lidar query
- GM_Error_LidarPointNotInQuery = 77
The Lidar point was not found in the Lidar query
- GM_Error_GenAreas = 78
An error occurred generating areas from equal values
- GM_Error_DownloadFailed = 79
A file download failed
- GM_Error_ExportFileAlreadyExists = 80
The specified export file already exists, and the option to allow overwrite was not specified
- GM_Error_DeleteFailed = 81
The specified export file could not be deleted.
- GM_Error_DatabaseCreationFailed = 82
The attempt to create a database file failed.
- GM_Error_SpatialOperationsError = 83
The attempt to perform a spatial operation failed
- GM_Error_LidarOpFailed = 84
A Lidar operation (classify, extract, etc.) failed
- GM_Error_NoChangesFound = 85
No changes were found in operation (like LidarCompare)
- GM_Error_PixelsToPoints = 86
A Pixels-to-Points operation failed
- GM_Error_NonEditable = 87
The provided data is not editable
- GM_Error_HoleNotInParent = 88
The provided hole geometry was not contained within the parent
- GM_Error_InvalidLayerName = 89
The provided layer name is invalid (null or “”)
- GM_Error_PositionOutOfBound = 90
The provided location is outside of the expected bounds
- GM_Error_FileError = 91
There was an error performing some kind of file operation, like file copy or move
GM_Error_NumCodes = 91
- GM_Error_NotImplemented = 0xFFFF
The given function hasn’t been implemented yet
Old errors renamed for backward compatibility
- GM_Error_TerraServerConnect = 19
A connection to the TerraService could not be established
- GM_Error_TerraServerBadTheme = 20
No TerraServer theme with the theme name provided could be found
- globalmapper.GM_Event_t
All the types of events that might occur in globalmapper
- Values:
- GM_Event_3DSizesChanged = 1
Sent whenever the texture or terrain size for the 3D view changes
- GM_Event_AreaGroupChanged = 2
Sent whenever the group ID of an area is changed (data is FeatureArea*)
- GM_Event_AreaTypeRemoved = 3
Sent whenever an area type is removed.
- GM_Event_BackgroundColorChanged = 4
Sent whenever the background color changes
- GM_Event_BatchExportFinished = 5
A batch or gridded (tiled) export has completed (data is BatchExportInfo_t*)
- GM_Event_BatchExportStarted = 6
A batch or gridded (tiled) export was started (data is BatchExportInfo_t*)
- GM_Event_ChildDrawCompleted = 7
Send whenever the draw of a child overlay completes (data is EventData_ChildDrawCompleted_t*)
- GM_Event_CustomAreaStyleRemoved = 8
Sent whenever a custom area style is removed
- GM_Event_CustomSymbolRemoved = 9
Sent whenever a custom symbol is removed
- GM_Event_DefaultAreaStyleChanged = 10
Sent whenever the default style for an area type is changed (data is AreaFeatureClass_t16)
- GM_Event_DefaultLineStyleChanged = 11
Sent whenever the default style for a line type is changed (data is LineFeatureClass_t16)
- GM_Event_DefaultPointStyleChanged = 12
Sent whenever the default style for a line type is changed (data is PointFeatureClass_t16)
- GM_Event_DrawDisable = 13
Sent whenever we want to disable draws
- GM_Event_DrawEnable = 14
Sent whenever we want to re-enable draws
- GM_Event_DrawScaleChanged = 15
Sent each time the GraphicsObject draw scale changed.
- GM_Event_ExportBoundsChanged = 16
Sent whenever the export bounds of a layer changes (like when cropping is changed)
- GM_Event_FeatureAdded = 17
Sent whenever a new feature is added to an existing layer (item data is Feature* that was added)
- GM_Event_FeatureClassificationChanged = 18
Sent whenever the classification of a feature is changed (item data is Feature* that was changed)
- GM_Event_FeatureDeleted = 19
Sent whenever features are marked as deleted (item data is Feature*)
- GM_Event_FeaturesMoved = 20
Sent whenever features are moved (item data is GM_EventData_FeaturesMoved_t*)
- GM_Event_FeatureStyleChanged = 21
Sent whenever the drawing style of a feature is changed (item data is Feature* that was changed)
- GM_Event_FileLoadRequested = 22
Sent to request load of a file (item data is CString*)
- GM_Event_FirstDraw = 23
Sent when the first draw is done
- GM_Event_GlobalProjChanged = 24
Sent each time the global projection is changed. The data is the old global projection.
- GM_Event_GridDisplayChanged = 25
Sent whenever the current grid display type is changed
- GM_Event_LayerStyleChanged = 26
Sent whenever a layer area style or line style is changed
- GM_Event_LicenseDongleLost = 27
Sent whenever a HASP dongle license is lost
- GM_Event_LicenseNetworkLost = 28
Sent whenever a network license is lost
- GM_Event_LicenseStatusChanged = 29
Sent whenever the license status changes (event data is ViewerConfig::ModuleType_t)
- GM_Event_LineTypeRemoved = 30
Sent whenever a line type is removed.
- GM_Event_MapViewChanged = 31
Sent whenever the coordinates in a map view change. The item data is a pointer to the view control object.
- GM_Event_MapViewUpdateNeeded = 32
Sent whenever the map view needs to be updated
- GM_Event_ModelessDialogClosing = 33
Sent whenever a modeless dialog is closed. The data is a pointer to the modeless dialog.
- GM_Event_MultiCloseStarted = 34
Sent whenever a multi-close operation starts
- GM_Event_MultiCloseStopped = 35
Sent whenever a multi-close operation completes
- GM_Event_MultiLoadStarted = 36
Sent whenever a multi-load operation starts
- GM_Event_MultiLoadStopped = 37
Sent whenever a multi-load operation completes. Data is GM_MultiLoadStateFlags_t32.
- GM_Event_OverlayBoundsChanged = 38
Sent whenever the bounding box of an overlay changes
- GM_Event_OverlayClosed = 39
Sent just after an overlay is closed and removed from the document’s overlay factory. gm.NULL for top-level layers, non-zero for child layers. The pointer for child layers will be to the parent layer.
- GM_Event_OverlayClosing = 40
Sent each time an overlay is closed from the document’s overlay factory. The data is a GeographicOverlay*
- GM_Event_OverlayLoaded = 41
Sent each time a new overlay is loaded into the document’s overlay factory. The data is a GeographicOverlay*
- GM_Event_OverlayOrderChangeFinished = 42
The movement of an overlay in the overlay list has finished
- GM_Event_OverlayOrderChangeStarted = 43
The movement of an overlay in the overlay list has started
- GM_Event_OverlayOptionsChanged = 44
Changed when any options that affect how an overlay is rendered are changed. The data is OverlayList_t* that changed.
- GM_Event_PathProfileFromPosChanged = 45
Sent whenever the from position of the current path profile is changed via a popup menu
- GM_Event_PathProfileToPosChanged = 46
Sent whenever the to position of the current path profile is changed via a popup menu
- GM_Event_PixelScanStart = 47
Called when a pixel scan starts
- GM_Event_PixelScanStop = 48
Called when a pixel scan stops
- GM_Event_PointTypeRemoved = 49
Sent when a point type is removed.
- GM_Event_PosFormatChanged = 50
The arc degrees display format has changed.
- GM_Event_PostDrawNeeded = 51
Draw on top of main map view is need. The data is a pointer to a CDC.
- GM_Event_RasterExportFinished = 52
A raster export has finished.
- GM_Event_RasterExportStarted = 53
A raster export has started. The data is a pointer to a RasterExportInfo_t structure.
- GM_Event_RenderStart = 54
Sent when a render operation starts
- GM_Event_RenderStop = 55
Sent when a render operation is finished
- GM_Event_RenderStart3D = 56
Sent when a 3D render starts
- GM_Event_RenderStop3D = 57
Sent when a 3D render is finished
- GM_Event_RenderStartVector = 58
Sent when a vector render starts
- GM_Event_RenderStopVector = 59
Sent when a vector render is finished
- GM_Event_ScaleUnitsChanged = 60
Sent whenever the scale units are changed
- GM_Event_ScriptFinished = 61
Sent whenever a script finishes processing
- GM_Event_ScriptStarted = 62
Sent whenever a script starts processing
- GM_Event_ShadersChanged = 63
Sent whenever the available shaders change.
- GM_Event_SharedRasterStatsChanged = 64
Sent whenever the shared raster stats for auto-contrast changes
- GM_Event_SpeedUnitsChanged = 65
Sent whenever the speed units change.
- GM_Event_TileDownloadFailed = 66
Sent whenever a tile download failed for an online source. (The data is a bool* that is a cancel flag. Set to true if the entire operation should be cancelled)
- GM_Event_VectorDisplayOptionsChanged = 67
Sent whenever a vector display option changes.
- GM_Event_VectorExportFinished = 68
A vector export has finished.
- GM_Event_VectorExportStarted = 69
A vector export has started. The data is a pointer to a VectorExportInfo_t structure.
- GM_Event_VectorTypeFiltersChanged = 70
Sent whenever the vector type filter settings change
- GM_Event_ViewBitmapInvalidated = 71
Sent whenever the view background bitmap is marked as invalid prior to a redraw.
- GM_Event_MinMaxElevRangeChanged = 72
Sent whenever the min/max elevation range changes
- GM_Event_LidarDisplayOptionsChanged = 73
Sent whenever a global Lidar display option changes.
- GM_Event_ChildLoadCompleted = 74
Send whenever the load of a child overlay compelte (data is GeographicOverlay*)
- GM_Event_ProfileCorridorWidthChanged = 75
Send whenever the corridor width on a path profile changes (data is double* with new corridor width in meters)
- GM_Event_OnIdleHandled = 76
Send whenever an OnIdle message happens in the main application. Use to control control state in modeless dialogs.
- GM_Event_MouseLButtonDown = 77
Sent when the Windows LButtonDown message is received (data is GM_MouseEventInfo_t*)
- GM_Event_MouseLButtonUp = 78
Sent when the Windows LButtonUp message is received (data is GM_MouseEventInfo_t*)
- GM_Event_MouseLButtonDoubleClick = 79
Sent when the Windows LButtonDblClick message is received (data is GM_MouseEventInfo_t*)
- GM_Event_MouseRButtonDown = 80
Sent when the Windows RButtonDown message is received (data is GM_MouseEventInfo_t*)
- GM_Event_MouseRButtonUp = 81
Sent when the Windows RButtonDown message is received (data is GM_MouseEventInfo_t*)
- GM_Event_MouseRButtonDoubleClick = 82
Sent when the Windows RButtonDown message is received (data is GM_MouseEventInfo_t*)
- GM_Event_StartDrawFeature = 83
Sent when the user starts to draw a line, area, or point feature (data is GM_DrawFeatureType*)
- GM_Event_AddFeatureVertex = 84
Sent when the user adds a vertex to a line, area, or point (data is GM_Point3D_t*)
- GM_Event_CompleteDrawFeature = 85
Sent when the completes the line, area, or point feature (data is Feature*)
- GM_Event_LidarClassificationChanged = 86
Sent whenever the classifications of Lidar points changed. Data is LidarPointCloud_t*
- GM_Event_LidarPointsDeleted = 87
Sent whenever the Lidar points are deleted. Data is LidarPointCloud_t*
- GM_Event_ExtensionActivated = 88
Sent to an extension when it is activated.
- GM_Event_ExtensionDeactivated = 89
Sent to an extension when it is deactivated.
- GM_Event_FeatureSelectionChanged = 90
Sent when the selection status of a feature changes (data is Feature* that was changed)
- GM_Event_SelectionCleared = 91
Sent when all selected features have been cleared (data is VectorOverlayList_t* of layers that were changed)
- GM_Event_OnlineDrawScaleSet = 92
Sent when the draw scale for an online layer was set (data is GM_OnlineEventInfo_t*)
- GM_Event_OnlineExportScaleSet = 93
Sent when the export scale for an online layer was set (data is GM_OnlineEventInfo_t*)
- GM_Event_LocalTileMissing = 94
Sent whenever a file from a local tile set is missing (data is GM_OnlineEventInfo_t*)
- GM_Event_LicenseNetworkRestored = 95
Sent whenever the connection to the network license server is restored.
- GM_Event_ShowErrorMessage = 96
Sent whenever an error message, possibly from a background thread, needs displayed
- GM_Event_MouseMove = 97
Sent when the Windows MouseMove message is received (data is GM_MouseMoveInfo_t*)
- GM_Event_LicenseInvalid = 98
Sent when a node-locked license is determined to be invalid (data is ViewerConfig::ModuleType_t)
- GM_Event_3DSetActiveTrack = 99
Sent to tell the 2D Viewer to update the 3D viewer’s active track
- GM_Event_SelectionAboutToClear = 100
Sent before all selected features are to be cleared
- GM_Event_SelectionChanged = 101
Sent when the selection of multiple unspecified items changes (data is FeatureList_t* with list of features whose selection changed)
- GM_Event_LidarSelectionChanged = 102
Sent whenever the selected Lidar points changes. (data is VectorOverlayList_t* of layers that were changed)
- GM_Event_CustomModelRemoved = 103
Send whenever a custom 3D model is removed (data is PointModelInfo_t*)
- GM_Event_FeatureString = 104
Retrieve feature string (data is GM_FeatureString*)
- GM_Event_FeatureVertexSelectionChanged = 105
Sent when the selection status of a feature vertex changes (data is Feature* that was changed)
- GM_Event_MeasurePointCollectionChanged = 106
Sent when the measure tool’s point collection changed (data is bool* indicating whether measuring is active)
- GM_Event_MeasureStopMeasuring = 107
Sent when the measure tool stops measuring
- GM_Event_LicenseDongleFound = 108
Sent whenever a HASP dongle license is found
- GM_Event_EnterMeasureMode = 109
Sent when measure mode is entered
- GM_Event_LeaveMeasureMode = 110
Sent when measure mode is left
- GM_Event_VertDispOptsChanged = 111
Sent whenever the vertical display options (vert exag, light angle, etc.) are changed.
- GM_Event_LidarClassNameChanged = 112
Sent whenever the name of a Lidar classification is changed (data is Lidar class code from 0-255)
- GM_Event_ThreadCompleted = 113
Sent whenever a thread completes (data is DWORD of thread ID that is being cleaned up or gm.NULL for current) - use to clean up thread local storage
- GM_Event_UserPannedView = 114
Sent whenever the user initiates a change of the center of the view
- GM_Event_UserZoomedView = 115
Sent whenever the user initiates a change of the zoom of the view
- GM_Event_IncrementalRepaintSkipped = 116
Sent whenever an incremental repaint is skipped because it is disabled
- GM_Event_PreTranslateMessage = 117
Sent only to GM extensions. Should only need to be handled if the extension has a modeless dialog.
- GM_Event_GetExtensionCommandState = 118
Sent only to GM extensions. Handle to provide enable/check state for toolbar buttons/menus. Data is a GM_ExtCommandState_t*.
- GM_Event_AppClosing = 119
Sent whenever the GM application is shutting down. Handle to clean up static state.
- GM_Event_EventList = 120
Sent whenever an event had been locked to prevent a flood of events. Contains all event data. Data is GM_EventList_t*.
- GM_Event_ViewChanged = 121
Sent whenever the displayed view bounds changes. Check the active view to see what is redrawing.
- GM_Event_OrientationChanged = 122
Sent whenever the orientation changes
- GM_Event_CurrentShaderChanged = 123
Sent whenever the current shared elevation shader changes
- GM_Event_LidarClassGroupChanged = 124
Sent whenever the class group for a given Lidar classification is changed (data is Lidar class code from 0-255)
- GM_Event_PathProfileChanged = 125
Sent whenever a path profile (either active or displayed in a path profile control) changes (data is CCtrlPathProfileLOS* if in a control or gm.NULL if from the active profile tool)
- GM_Event_PathProfileViewPos = 126
Sent whenever the current path profile view position changes. Data is Point3D* (0 if no point is available)
- GM_Event_DocumentDeleting = 127
Sent when the document object is being deleted
- GM_Event_ThreadPreCompleted = 128
DEPRECATED - Sent before the GM_Event_ThreadCompleted event so that anything that needs handle before the main thread completed cleanup can happen. Data is thread handle being completed or O for current thread.
- GM_Event_CurrentWorkspaceChanged = 129
Sent whenever the current workspace filename changes.
- GM_Event_RestoreDefaultSettings = 130
Sent whenever the user has selected the ‘restore default settings’ button on the Config dialog
- GM_Event_FlyThroughPathChanged = 131
Sent whenever the user has modified a fly-through path
- GM_Event_StartEditMode = 132
Sent when the user enters edit mode by selecting a feature type to create (data is GM_DrawFeatureType*)
- GM_Event_StopEditMode = 133
Sent when the user cancels edit mode
- GM_Event_LidarPointCloudAdded = 135
Sent whenever a new Lidar point cloud is added to an already loaded layer (data is LidarPointCloud_t*)
- GM_Event_FeatureAttrListChanged = 136
Sent whenever the attribute list of a feature is changed (item data is Feature* that was changed)
- GM_Event_FeatureIs3DChanged = 137
Sent whenever the ‘is 3D feature’ status of a feature is changed (item data is Feature* that was changed)
- GM_Event_3dView2dBoundsClipping = 139
Sent when the setting for 3D viewer’s 2D bounds clipping is changed (no item data)
- GM_Event_FeatureMeshGeometryChanged = 140
Sent whenever the geometry (vertices, normals, etc.) of a feature mesh is changed (item data is FeatureMesh* that was changed)
- GM_Event_LayerDescriptionChanged = 141
Sent when the layer description changes (item data is GeographicOverlay* with the changed description)
- GM_Event_MeasureAttrsChanged = 142
Sent whenever one or more measure attributes changes for a feature. Send instead of GM_Event_FeatureAttrListChanged (data is Feature* that was updated)
- GM_Event_Search_Modified = 143
Sent when a search criteria has changed. Initially used for searching layers in the control center.
- GM_Event_LidarRenderDataChanged = 144
Sent whenever a value being drawn for Lidar points in a cloud changes (data is LidarPointCloud_t*)
- GM_Event_LidarNonRenderDataChanged = 145
Sent whenever a value NOT being drawn for Lidar points in a cloud changes (data is LidarPointCloud_t*)
- GM_Event_LoadingUserSettingsUI = 146
Sent when importing user settings that require a reload
- GM_Event_TerrainPaintCompleted = 147
Sent when a terrain paint operation has modified elevations
- GM_Event_3dViewListChanged = 148
Sent when the number of 3d views change
- GM_Event_RenderStartProfile = 149
Sent when a path profile render operation starts (data is CCtrlPathProfileLOS being rendered)
- GM_Event_RenderStopProfile = 150
Sent when a path profile render operation finishes (data is CCtrlPathProfileLOS being rendered)
- GM_Event_FeatureLabelChanged = 151
Sent whenever the display label of a feature is changed (item data is Feature* that was added)
- GM_Event_FeatureDescChanged = 152
Sent whenever the description of a feature is changed (item data is Feature* that was added)
- GM_Event_FeaturesRemoved = 153
Sent whenever one or more features are removed (not deleted, actually removed) from a layer (item data is VectorOverlay* that the features were removed from)
- GM_Event_LayerUniqueIdChanged = 154
Sent whenever the unique ID for a layer is changed (data is GeographicOverlay*)
- GM_Event_IslandFeatureAdded = 155
Sent whenever a new island is added to an already loaded area feature (item data is FeatureAreaIsland* that was added)
- GM_Event_GmmDiscovered = 156
Sent whenever a mobile device running GMM is discovered (item data is MobileDataManagementClient::DeviceInfo_t)
- GM_Event_GmmConnectionStatusChanged = 157
Sent whenever the connection to a mobile device running GMM has changed (item data is bool, true if connected)
- GM_Event_NewScriptBuilderStepAdded = 158
Sent whenever there is a new script builder command added
- GM_Event_NumNonGPS = 159
Number of non-GPS event ID
- GM_Event_MinGPS = 1000
The minimum GPS event ID
- GM_Event_GPSAutoDetectDone = 1000
GPS auto-detect has completed
- GM_Event_GPSAutoDetectStart = 1001
GPS auto-detect has started
- GM_Event_GPSDeviceChange = 1002
GPS device has changed
- GM_Event_GPSInitDone = 1003
GPS initialization is done
- GM_Event_GPSLoggingSettingsChanged = 1004
GPS logging settings have changed
- GM_Event_GPSModeChange = 1005
GPS mode has changed
- GM_Event_GPSMultiVehicleUpdate = 1006
GPS update of multi-vehicle position list
- GM_Event_GPSNewNmeaSentence = 1007
GPS report of new NMEA sentence read
- GM_Event_GPSPosition = 1008
GPS position report
- GM_Event_GPSReportEndOfFile = 1009
GPS end of NMEA file has been reached and we’re not looping
- GM_Event_GPSReportFix = 1010
GPS fix is reported
- GM_Event_GPSReportLostDiff = 1011
GPS differential fix was lost
- GM_Event_GPSReportLostFix = 1012
GPS fix was lost
- GM_Event_GPSReportNotUsable = 1013
GPS fix is not usable
- GM_Event_GPSReportValidDiff = 1014
GPS differential fix was detected
- GM_Event_GPSSatStatusChange = 1015
GPS satellite status has changed
- GM_Event_GPSTextMessageReceived = 1016
GPS text message received (event data is GPS_txt_msg_type*)
- GM_Event_GPSTrackingStopped = 1017
GPS tracking was stopped
- GM_Event_GPSWaypointReceived = 1018
GPS waypoint received (event data is GPS_waypoint_type*)
- GM_Event_GPSTrackingStarted = 1019
GPS tracking was started
- GM_Event_GPSKeepVesselOnScreenChanged = 1020
The ‘keep GPS vessel on screen’ or ‘keep video playback location on screen’ setting changed
- GM_Event_GPSTrackUpDisplayChanged = 1021
The ‘rotate map to match GPS heading or video playback heading’ setting changed
- GM_Event_GPSKeepTargetPolyOnScreenChanged = 1022
The ‘keep GPS/video target polygon on screen’ setting changed (Aerial Filmworks)
- GM_Event_MaxGPS = 1022
The maximum GPS event ID. Always update when adding a new GPS event.
GM_Event_Invalid = -1
- globalmapper.GM_ExtCmdStateFlags_t32
Flag definition for controlling extension command item state
- Values:
- GM_ExtCmdState_Disable = 0x00000001
Disable the command item
- GM_ExtCmdState_Check = 0x00000002
Check/press the command item
- globalmapper.GM_Language_t8
Enumeration of native languages possible for a build.
- Values:
GM_LANG_ENGLISH = 0
GM_LANG_ARABIC = 1
GM_LANG_FRENCH = 2
GM_LANG_GREEK = 3
GM_LANG_ITALIAN = 4
GM_LANG_KOREAN = 5
GM_LANG_JAPANESE = 6
GM_LANG_PORTUGESE = 7
GM_LANG_CHINESE_TRADITIONAL = 8
GM_LANG_SPANISH = 9
GM_LANG_POLISH = 10
GM_LANG_RUSSIAN = 11
GM_LANG_TURKISH = 12
GM_LANG_GERMAN = 13
GM_LANG_NUM_LANGUAGES = 14
- globalmapper.GM_LogLevel_t8
Error logging levels. Lower is higher priority
- Values:
Logging values
GM_Log_Critical = 0
GM_Log_Error = 1
GM_Log_Warning = 2
GM_Log_Status = 3
GM_Log_Debug = 4
- GM_Log_ExtremeDebug = 5
Extreme debugging, only access via registry. Will issue TRACE otherwise.
Special values for different log files
- GM_Log_Timing = 100
Log a timing. Goes to timings.txt
Other special value/aliases
- GM_Log_ImportantStatus = GM_Log_Error
Log status in almost all cases. Just don’t want to look like error in code
GM_Log_HighestLogLevel = GM_Log_ExtremeDebug
- GM_Log_DontLog = 253
Don’t log message. Used as special value in function parameters to see if logging is needed. Note this will still issue a TRACE if passed to GM_LOG_MSG in Debug.
- GM_Log_Nothing = 254
Don’t log or trace the message. Used as special value in function parameters if we want to keep log code to re-enable later.
GM_Log_NotRead = 255 The log level has not been read yet
- globalmapper.GM_MenuType_t
Menu types that an extension context menu item can be added to.
- Values:
GM_Menu_Digitizer = 0
GM_MenuNumTypes = 1
- globalmapper.GM_MiscOpt_t32
Misc. advanced options flags used with GM_SetMiscOptionEx
- Values:
- GM_MiscOpt_DXFInsertsAsPoints = 0
Import DXF INSERT entities as points
- GM_MiscOpt_TIFFPreferTFW = 1
Prefer TFW coordinates for GeoTIFF files
- GM_MiscOpt_ExportOldFormatPRJ = 2
Export old format PRJ instead of new format
- GM_MiscOpt_DXFLayersAsCustomTypes = 3
Add new custom types for DXF layers
- GM_MiscOpt_HideNonIconRoadLabels = 4
Hide any road labels that are not icons
- GM_MiscOpt_ClampGridToDataBounds = 5
Don’t expand grid lines beyond the edge of loaded data
- GM_MiscOpt_BILQueryFor16BitType = 7
When loading BIL (and other similar) imagery that is 16-bit and single band, ask the user if it is elevation or imagery data
- GM_MiscOpt_BorderHighlightAreas = 8
Only draw a thick border for highlighted areas rather than a filled cross-hatch
- GM_MiscOpt_AddRecIDAttribute = 9
Add record ID (index) as attribute for vector features from some file types
- GM_MiscOpt_DefaultToOEMCharset = 11
Make default font display use the OEM character set (codepage 437) rather than the ANSI character set (codepage 1252)
- GM_MiscOpt_CenterLabelsTransparent= = 12
Make labels centered on lines use transparent background rather than opaque
- GM_MiscOpt_MarkAddressedSegments = 13
Mark line segments with addressing with dashed styles on the side(s) of the line with addressing
- GM_MiscOpt_HideOffscreenLabels = 14
Don’t display any labels that aren’t completely onscreen
- GM_MiscOpt_UseCRLFInWorldFiles = 15
Use CR/LF to terminate lines in exported world files rather than just LF
- GM_MiscOpt_LogDebugMessages = 16
DEPRECATED - Use GM_MiscOpt_SetLogLevel instead - Log debug messages to a file or via message callback
- GM_MiscOpt_DontCropAtATM = 17
Don’t crop lat/lon area and line features that cross the ATM or have bad lat/lon values
- GM_MiscOpt_DisableAutoSmooth = 18
Disable automatic interpolation of raster data at intermediate zoom levels
- GM_MiscOpt_UseFilePathForExport = 19
Use path to first loaded file as default export path
- GM_MiscOpt_MarkTurnRestrictions = 20
Mark the ends of lines involved in turn restrictions
- GM_MiscOpt_DontAutoContrastDGTiffs = 21
Disable automatic contrast adjustment for Digital Globe imagery
- GM_MiscOpt_HideMeasureAttrUnitNames = 22
Hide the unit names on measure unit text
- GM_MiscOpt_DGNImportCellsAsPoints = 27
Import DGN cells as point features rather than exploding them
- GM_MiscOpt_DGNAddColorToDesc = 28
Add DGN feature color to description in addition to level
- GM_MiscOpt_MaintainExportBounds = 32
Maintain export bounds over spacing
- GM_MiscOpt_AutoIconizeRoadNames = 33
Automatically iconize road type names on import
- GM_MiscOpt_RenderEndpoints = 34
Render area and line start and end vertices
- GM_MiscOpt_KeepPixelIfAnyInCropPoly = 37
Keep pixel on export if any part of the pixel is inside the crop polygon/bounds rather than just the center
- GM_MiscOpt_LabelLinesOnLongestSeg = 38
Always label lines along longest segment
- GM_MiscOpt_AreaLabelsMustFitInArea = 40
Only display area labels if the label fits inside the area feature.
- GM_MiscOpt_TreatDbfTextAsUtf8 = 42
DEPRECATED - Treat DBF file text as UTF-8 encoded
- GM_MiscOpt_AlwaysInterpolateRasters = 43
Always enable interpolation for raster layers when loading them
- GM_MiscOpt_DisableAutoExportInterp = 45
Disable automatic interpolation of reprojected layers during export
- GM_MiscOpt_UsePenUpBorderDrawMode = 47
When duplicate vertex is encountered in area feature, turn off next border segment
- GM_MiscOpt_UseGridDistance = 51
Measure using grid distance instead of Vincenty lat/lon distance
- GM_MiscOpt_AlwaysFakeRasterPos = 53
Always fake the positioning information for unknown raster files
- GM_MiscOpt_PlacePRJAfterFullFName = 55
Place PRJ after full filename, like test.ecw.prj for test.ecw, when generating PRJ files on export
- GM_MiscOpt_IncludeDatumXFormAndEpsgInPRJ = 59
Include datum transformation parameters (TOWGS84) and EPSG does in generated WKT PRJ files. Not compatible with ESRI as morphToEsri removes them.
- GM_MiscOpt_DefaultContrastMinMax = 60
Default auto contrast adjustment to linear min/max stretch
- GM_MiscOpt_S57IncludeValAndDesc = 61
Include both the value and description in the attributes for S57 features
- GM_MiscOpt_UseRhumbLineDistance = 63
Measure using rhumb line distance instead of Vincenty lat/lon or grid distance
- GM_MiscOpt_DisableAutoContrast = 64
Disable automatic constrast adjustment for high bit depth images
- GM_MiscOpt_SnapExportToPixel = 65
Snap non-reprojected exports to raster data pixel boundary
- GM_MiscOpt_NoAutoInterpTerrain = 66
Disable automatic interpolation of terrain layers on import
- GM_MiscOpt_GeoTIFFNoCompDefault = 69
Default GeoTIFF exports to no compression
- GM_MiscOpt_MeasureWholeNumbers = 73
Force measurements to use nearest whole number (integer) value
- GM_MiscOpt_ShowSegLensOnMap = 74
Label the length of each line segment on the map.
- GM_MiscOpt_ShowSegBearingsOnMap = 80
Label the bearing of each line segment on the map.
- GM_MiscOpt_CheckBinarySTL = 81
Check ‘export binary STL’ option on export options dialog
- GM_MiscOpt_DontCopyErrorToClip = 82
Don’t automatically copy error messages to the clipboard
- GM_MiscOpt_LoadExifJpgAsImage = 83
Ignore EXIF position data in JPG files and load them as images instead
- GM_MiscOpt_DontAppendGridUnits = 84
Don’t append unit labels (like ‘m’) to projected grid line labels
- GM_MiscOpt_DisableCustomFileSave = 85
Disable the save of custom features to files on shutdown, like custom_datums.txt, etc.
- GM_MiscOpt_OnlySnapToPoints = 88
Only snap to point features by default
- GM_MiscOpt_SnapExportToSpacing = 89
Snap exports to nearest sample spacing boundary
- GM_MiscOpt_S57ShortAttrNameVal = 90
Use short attribute names and raw values in S57 attribute list
- GM_MiscOpt_ElevCropAreaBoundsGrid = 91
When cropping an elevation export to an area, treat the area bounds as grid cell and not visual bounds
- GM_MiscOpt_RectifyNo2ndDegPoly = 93
Don’t switch to 2nd degree polynomial rectification method for 6+ control points
- GM_MiscOpt_ScaleElevShaderToView = 94
Scale elevation shader to just the elevation values that are currently in view
- GM_MiscOpt_GPSUseShaderForVessel = 95
Use the current elevation shader and GPS elevation to color the GPS vessel
- GM_MiscOpt_GPSUseShaderForTrack = 96
Use the current elevation shader and GPS elevation to color the GPS track
- GM_MiscOpt_OnlineExportZoomSameAsDraw = 98
When exporting from an online source, use the exact same logic to select the zoom level as is used during draw
- GM_MiscOpt_RestoreLastMapLayout = 99
Restore the last used map layout between sessions rather than just through workspaces
- GM_MiscOpt_HideStyleAttr = 101
Don’t display any style attributes that are included with features at load time
- GM_MiscOpt_KeepEntireClippedFeature = 102
When exporting cropped to a polygon, keep the entire area/line if it overlaps crop areas at all
- GM_MiscOpt_MSSQLUseGeometryColumns = 103
When importing from MS SQL Server, use geometry_columns table to get list of spatial tables
- GM_MiscOpt_DontPrependGroupsToLayerNames = 105
Don’t prepend layer group names to layer names in layer selection list in feature edit dialog
- GM_MiscOpt_OnlineTilesSaveWorldFile = 107
Automatically create world files and PRJ files for downloaded online tiles. Bug 15140
- GM_MiscOpt_DontPreventLabelCollisionsAcrossLayerGroups = 108
Don’t prevent the collision of labels across layer group boundaries when drawing and labeling each vector layer separately rather than all at once.
- GM_MiscOpt_PdfUseOldRenderer = 109
Use the old GDI+ render engine for PDF display on load rather than new DPLR (QuickPDFRenderer.dll) rendering engine. Can fix issues with display of some files that new engine doesn’t show correctly.
- GM_MiscOpt_DontSaveViewLayoutToGMW = 110
If set, don’t save or restore non-default multi-view layouts to/from workspace files
- GM_MiscOpt_DontShowPerpProfileHelpTip = 111
If set, don’t show the instructional tip when initially adding a feature for extraction on the path profile control
- GM_MiscOpt_GPSStartTrackingAtStartup = 112
If set, GPS tracking will attempt to start when the application initially starts
- GM_MiscOpt_RenderAutoCropPolyOnMap = 113
If set, render automatic crop polygons (PDF, BSB, etc.) on map when present. Use for debugging crop boundaries.
- GM_MiscOpt_ControlCenterReverseOrder = 114
If set, the layers in the Control Center will render with the top displayed layer as the first item and proceed down the draw stack from there.
- GM_MiscOpt_DontCenterMapOnSelVertex = 115
If set, we will NOT center the main map view on the selected vertex when clicking on it on the Feature Vertices dialog
- GM_MiscOpt_ReformatDbfNumbers = 116
If set, we will reformat any DBF file Number fields in scientific notation to a prettier format if in a normal range (i.e. no huge exponent)
- GM_MiscOpt_OverviewDrawLabels = 117
Indicates whether or not to draw feature labels in the Overview Map window
- GM_MiscOpt_OverviewTrackVisibleLayers = 118
Indicates whether or not the overview window bounds will include only visible layers
- GM_MiscOpt_DisableScriptRunCommand = 119
If set, the RUN_COMMAND script command will not be allowed to run (Bug 20859). Should NOT be able to change this from a script.
- GM_MiscOpt_DisplayLatLongPadding = 120
If set, the Lat/Long values displayed in the status bar will be zero padded (lat = DD, long = DDD)
- GM_MiscOpt_OverlapFakePosRasterLayers = 121
When loading image layers and faking the location for display, should we draw them on top of each other or next to each other?
- GM_MiscOpt_GridRemoveTrailingZeros = 122
Remove trailing zeros on grid coordinate labels
- GM_MiscOpt_HideSelFeatures = 123
If set, selected features should not be drawn
- GM_MiscOpt_LidarUpdateRetCountOnDelete = 124
Should we update the return count and number for Lidar points when deleting from a multi-return pulse?
- GM_MiscOpt_DefaultUserCreatedLayer = 125
Make the old User Created Features layer the default.
- GM_MiscOpt_DefaultUseDisplayProjection = 126
Use the current display projection instead of asking user for one when creating layers
- GM_MiscOpt_DisplayTimesAsUTC = 127
Display vertex timestamps using UTC rather than local time (Bug 26506)
- GM_MiscOpt_UseUserDefinedAnimationTime = 128
Use the default total animation time when determining animate frame update rate.
- GM_MiscOpt_NoLayerSaveWarning = 131
If set, don’t show warning asking if yo want to save modified layer before closing
- GM_MiscOpt_NoLayerReorderWarning = 132
If set, don’t show warning when reordering layer around a grouped layer
- GM_MiscOpt_LidarSaveRetCountUpdatedPts = 133
If set, save a debug layer with all Lidar points that had their return count updated due to deletion
- GM_MiscOpt_SnapToLidar = 134
If set, snap to Lidar points when digitizing
- GM_MiscOpt_DGNImportByLevel = 135
When importing DGN, split features into GM layers by DGN Level
- GM_MiscOpt_DWGImportByLayer = 136
When importing DWG/DXF, split features into GM layers by DWG/DXF layer
- GM_MiscOpt_XYZLoadAsLidarCloud = 137
If set XYZ ascii file will be loaded as a Lidar point cloud
- GM_MiscOpt_UpdatePicturePointExifOnMove = 138
Update picture point image file EXIF if point is moved
- GM_MiscOpt_BackupPicturePointImageOnUpdateExif = 139
Create backup when modifying picture point image file EXIF
- GM_MiscOpt_GeoTIFFExportOverview = 140
Export overview with GeoTIFF
- GM_MiscOpt_DWGUseLegacyImporter = 141
Use the legacy importer for DWG files (convert to DXF, then import with the legacy DXF importer)
- GM_MiscOpt_DXFUseLegacyImporter = 142
Use the legacy importer for DXF files
- GM_MiscOpt_S57DontMultiLayerLoad = 143
Don’t prompt the user to load view groups into different layers
- GM_MiscOpt_ShowGridRefForBritGrid = 144
Show grid ref on status bar instead of northing and easting
- GM_MiscOpt_FormatEpochAttrEditor = 145
Show epoch dates as mm/dd/yyyy format in the attribute editor
- GM_MiscOpt_GpsDontExportActiveTrack = 146
Don’t export the actively recording track layer when doing a vector export
- GM_MiscOpt_StayInMoveMode = 147
Don’t cancel move mode after moving
- GM_MiscOpt_DontUseAutoStylePoint = 151
Do not use auto styling for point features
- GM_MiscOpt_DontUseAutoStyleArea = 152
Do not use auto styling for area features
- GM_MiscOpt_DontUseAutoStyleLine = 153
Do not use auto styling for line features
- GM_MiscOpt_ColorAbsValueLidarScanAngle = 154
When coloring Lidar by scan angle, just color the absolute value of the scan angle (positive and negative look the same)
- GM_MiscOpt_ForceCPUforAITools = 155
If set, AI tools (training and inference) will be run on cpu even if a gpu is available
- GM_MiscOpt_DrawFatRoads = 256
Draw roads with fat style when zoomed in
- GM_MiscOpt_LinearMeasureUnits = 257
Linear measurement units (value is GM_LinearUnits_t8 type)
- GM_MiscOpt_AllowUnlimitedECWExportSize = 258
Allow ECW exports greater than 500MB uncompressed. You must have the appropriate license from Erdas to do this.
- GM_MiscOpt_SetVectorExportElevUnits = 259
Specifies the elevation units to use when exporting 3D features with per-vertex elevations or associated single elevation values (value is GM_ElevUnits_t8, but must be meters or feet)
- GM_MiscOpt_PositionDisplayFormat = 260
Position display format (value is GM_PosDisplayFormat_t8 type)
- GM_MiscOpt_AreaMeasureUnits = 261
Area measurement units (value is GM_AreaUnits_t8)
- GM_MiscOpt_VolumeMeasureUnits = 262
Volume measurement units (value is GM_VolumeUnits_t8)
- GM_MiscOpt_SetDefaultFontCharset = 263
Sets the default font character set (value is Windows character set enumeration, like OEM_CHARSET, RUSSIAN_CHARSET, etc.)
- GM_MiscOpt_ElevDispExpUnits = 264
Sets the default elevation display/export units (value is GM_ElevDisplayUnits_t8 type)
- GM_MiscOpt_SetLogLevel = 265
Sets the error/debug log level (value is GM_LogLevel_t8)
- GM_MiscOpt_SetLogFilename = 266
Sets the log filename (value is str) - Use GM_SetMiscOptionEx
- GM_MiscOpt_SetTimingsFilename = 267
Sets the filename to log detailed timings to (value is str) - Use GM_SetMiscOptionEx
- GM_MiscOpt_SetTempFolder = 268
Sets the base temporary file path (value is str) - Use GM_SetMiscOptionEx
- GM_MiscOpt_GPSCenterOnVehicle = 269
Automatically center the display on the GPS location
- GM_MiscOpt_GPSOrientTrackUp = 270
Automatically rotate the display so the GPS heading points directly up
- GM_MiscOpt_CenterOnTargetPoly = 271
Automatically center the display on the GPS/video target polygon (Aerial Filmworks extension)
- GM_MiscOpt_VideoCenterOnVehicle = 272
Automatically center the display on the video playback location
- GM_MiscOpt_VideoOrientTrackUp = 273
Automatically rotate the display so the video playback heading points directly up
- GM_MiscOpt_BearingSense = 274
Bearing sense (i.e. True North, Mag North, Grid North) (value is GM_BearingSense_t8)
- GM_MiscOpt_SetLidarDrawMode = 275
Sets the global Lidar draw mode used when Lidar module active (value is GM_LidarDrawMode_t8)
- GM_MiscOpt_SetDefaultProjection = 276
Sets the default projection to use at startup (or None to reset) (value is GM_Projection_t*)
- GM_MiscOpt_Invalid = 0xFFFFFFFF
Invalid
- GM_MiscOpt_IncludeDatumXFormInPRJ = GM_MiscOpt_IncludeDatumXFormAndEpsgInPRJ
Renamed value defined for backwards compatibility
- globalmapper.GM_MiscOptVal_t8
Miscellaneous option values. Pass to GM_SetMiscOption
- Values:
- GM_MiscOptVal_Off = 0
Don’t set option
- GM_MiscOptVal_On = 1
Set option
- GM_MiscOptVal_Toggle = 2
Toggle option
- globalmapper.GM_ProgressUpdate_t8
Types of progress reported through GM_ProgressCallbackFunc
- Values:
- GM_PROGRESS_START = 0
Progress has started
- GM_PROGRESS_UPDATE_STATUS = 1
Status string updated
- GM_PROGRESS_UPDATE_PERCENT = 2
Percent complete updated
- GM_PROGRESS_STOP = 3
Operation has completed
- GM_PROGRESS_RENDER_UPDATE = 4
The device context for a draw has been updated
- GM_PROGRESS_DOWNLOAD_FAILED = 5
Tile download failed for online source
- GM_PROGRESS_UPDATE_CAPTION = 6
Caption string set/updated. The caption will be in the status parameter of the callback
- GM_PROGRESS_CHECK_CANCEL = 7
Call made just to check for cancel
GM_PROGRESS_NUM_TYPES = 8
- globalmapper.GM_SmartPromptReturn_t32
Type to use for optional prompt when you want to specify whether to show a prompt or not and if it has already been shown, the value to use. The upper 2 bits are used for state to control whether or not the prompt should be shown (and if so has it already). The lower 30 bits will be the prompt return value, like IDYES, IDNO, OR IDCANCEL.
- Values:
- GM_Prompt_ShowPrompt = 0x80000000
Show the prompt
- GM_Prompt_AlreadyShown = 0x40000000
The prompt has already been shown
- globalmapper.GM_SpecialLayerPtr_t
Special layer pointers for list item data. All are odd numbers so that they will never be a real pointer value.
- Values:
- GM_Layer_AddToUserCreated = 1
Add feature to User Created Features layer
- GM_Layer_MultipleSelectedParents = 3
Multiple layers selected for selection that allows one layer
- GM_Layer_CreateNewLayerParent = 5
Create a new layer for for feature
- GM_Layer_MapLayoutLayers = 7
Represents map layout layers (scale bar, legend, etc.)
- GM_Layer_GPSLayers = 9
Represents GPS position and track layers
- GM_Layer_NewLayerFromFile = 11
Load a new layer from a file
- GM_Layer_NormalPtr = 0xFFFFFFFF
Special value for normal layers when stored as a type
GM_Layer_MinSpecialLayerPtr = GM_Layer_AddToUserCreated
GM_Layer_MaxSpecialLayerPtr = GM_Layer_NewLayerFromFile