This is the legacy list of Global Mapper projections (included in Global Mapper 26.2 or earlier). These are documented here for reference.
For a browser-based list of available coordinate reference systems and transformations available in Global Mapper, use the Search tool in Geographic Calculator Online. Note that the website can be updated more frequently than Global Mapper. If a system has recently been added to Geographic Calculator Online, and is not yet built into Global Mapper, it can be added by Editing the Datasource.
Global Mapper provides a number of projection methods and built in named projections available in the Configuration> Projection tab, and in the layer projection tab.
The projection list includes both projection methods that are configurable, and specific named projection definitions. When switching between specific named projections and configurable projections, any matching parameters will be maintained in the configurable projection.
'Reprojection on the fly' and Transformations
Global Mapper uses a set of predefined transformations to reproject data natively stored in other projections into the current display projection defined in the Configuration> Projection menu. All transformations are via WGS84.
Loading Projections
Custom projections may be loaded from a prj file, txt file in WKT format, or esri xml file. When loading a file with no projection, recognized projection and control point files in the same location with the same file name will automatically be used. Load projections from GeoCalcOnline by logging in and saving the WKT to a TXT file, then load in Global Mapper, using the Load from File button in the projection section.
When loading a projection, Global Mapper will attempt to match the projection to a known projection and datum definition. This is done because different projection libraries report projection parameters with varying precision. WKT PRJ files always specify the base projection system (like Transverse Mercator, Albers Conic, etc.) with parameters rather than directly using a named grid system in the standardized part (the PROJCS name can be anything). Global Mapper loads the specified base projection system, then looks through the list of pre-defined systems, both zoned like UTM and State Plane, and individual grid systems like British Grid, for a match within an allowed difference in parameters (i.e. within 10 cm for linear parameters like false easting/ northing or within 1 / 10,000,000 difference for angular values). If all attribute values match and the datum is allowed, then the alias projection is automatically selected.
When a custom definition is loaded from a file in WKT format, Global Mapper will look for a datum match for the TOWGS84 parameters describing the transformation. For a datum match, the datums must be on the same ellipsoid (or the ellipsoids are identical within 10cm on both axes) and have a combined delta X in the transform parameters of < 1m. If multiple datums meet the criteria, the one with the closest match is used.
If a .gm_xform file is present in the same folder and has the same name as the loaded file, the specified transformation will automatically be applied to the coordinates in the file. The information provided should be in the same coordinate system (projection) as natively used by the layer(s) being transformed. The .gm_xform files are not applied automatically for files using unprojected (Geographic) coordinates. For more information see SHIFT - Specify Coordinate Transformation.
Custom Projection Names
When a projection definition is loaded from a file that contains a custom name, differing from the built in projection name, that information is stored in the Global Mapper User Data folder in the epsg_codes.txt file. The custom name will not display in the interface, but will be used for all exported projection files. For more information see
Related topics
- Coordinate Reference System Configuration
- Layer Coordinate System Tab
- Legacy Projection Definitions
- Legacy Projection Handling
- Loading Files with Unknown Coordinate Reference System
- Status Bar
Projections
| Projection | Parameters |
|---|---|
| 3TM (Alberta) | by zone |
| 10TM (Alberta) | by zone |
| Aitoff-Wagner | CENTRAL MERIDIAN |
| Alaska Conformal | FALSE EASTING (m) FALSE NORTHING (m) |
| Albers Conic | FIRST STANDARD PARALLEL SECOND STANDARD PARALLEL CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| AMG (Australian Map Grid) | by zone |
| Austrian Grid | by zone |
| Azimuthal Equidistant | CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Belge 1972 (Belgium Lambert 1972) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=51.1666672333 SECOND STANDARD PARALLEL=49.8333339 CENTRAL MERIDIAN=4.3674866667 ORIGIN LATITUDE=90 FALSE EASTING (m)=150000.013 FALSE NORTHING (m)=5400088.438 |
| Bipolar Oblique Conic West | |
| Bonne | CENTRAL MERIDIAN CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| British Grid | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=-2 ORIGIN LATITUDE=49 FALSE EASTING (m)=400000 FALSE NORTHING (m)=-100000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Cassini Malaysia | by zone |
| Cassini-Soldner | CENTRAL MERIDIAN CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Cassini-Soldner (Italia) | CENTRAL MERIDIAN CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Cassini Soldner (Italia) [Origini - Grande Est.] | by zone |
| Cassini Soldner (Italia) [Origini - Locali - BAS] | by zone |
| Cassini Soldner (Italia) [Origini - Locali - CAM] | by zone |
| Cassini Soldner (Italia) [Origini - Locali - PUG] | by zone |
| Cassini Soldner (Italia) [Origini - Locali - VDA] | by zone |
| Cassini Soldner (Italia) [Origini - Locali - VEN] | by zone |
| Croatia (TM) | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=16.5 ORIGIN LATITUDE=0 FALSE EASTING (m)=500000 FALSE NORTHING (m)=0 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Double Stereographic | CENTRAL MERIDIAN SCALE FACTOR CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Dutch Grid (RD) | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL LONGITUDE=5.387638889 CENTRAL LATITUDE=52.15616056 FALSE EASTING (m)=155000 FALSE NORTHING (m)=463000 |
| Equal Earth | CENTRAL MERIDIAN FALSE EASTING FALSE NORTHING |
| Eckert IV | CENTRAL MERIDIAN |
| Equidistant Conic A | STANDARD PARALLEL CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Equidistant Conic B | FIRST STANDARD PARALLEL SECOND STANDARD PARALLEL CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Equirectangular | CENTRAL MERIDIAN TRUE SCALE LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Gall Stereographic | CENTRAL MERIDIAN |
| Gauss Boaga (Italia) | by zone |
| Gauss Krueger (6 degree zones) | by zone |
| Gauss Krueger Argentina | by zone |
| Gauss Krueger (Croatia) - HDKS | by zone |
| Gauss Krueger (3 degree zones) | by zone |
| Gauss Krueger Slovenia | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=15 ORIGIN LATITUDE=0 FALSE EASTING (m)=500000 FALSE NORTHING (m)=-5000000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Geographic (Latitude/Longitude) | CENTRAL LONGITUDE |
| Geografica (Italia) [Latitudine/Longitudine] | CENTRAL LONGITUDE |
| Gnomonic | CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Greek Grid | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=24 ORIGIN LATITUDE=0 FALSE EASTING (m)=500000 FALSE NORTHING (m)=0 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Hammer-Aitoff | CENTRAL LONGITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Hotine Oblique Mercator A | PROJECTION CENTER SCALE FACTOR ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) LATITUDE 1 LATITUDE 2 LONGITUDE 1 LONGITUDE 2 |
| Hotine Oblique Mercator B | PROJECTION CENTER SCALE FACTOR AZIMUTH ANGLE AZIMUTH PT (CENTRAL LONGITUDE) ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Hotine Oblique Mercator Azimuth Nat. Orig. | PROJECTION CENTER SCALE FACTOR AZIMUTH ANGLE AZIMUTH PT (CENTRAL LONGITUDE) ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Interrupted Goode Homolosine | CENTRAL LONGITUDE |
| Hungarian National Grid (EOV) | PROJECTION CENTER SCALE FACTOR=1 AZIMUTH ANGLE=90 AZIMUTH PT (CENTRAL LONGITUDE)=19.04857178 ORIGIN LATITUDE=47.14439372 FALSE EASTING (m)=650000 FALSE NORTHING (m)=200000 |
| India Zoned Grid | by zone |
| inGCS (Indiana Geospatial Coordinate System) | by zone |
| Irish Grid | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=-8 ORIGIN LATITUDE=53.5 FALSE EASTING (m)=200000 FALSE NORTHING (m)=250000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Israel Grid (New) | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=35.2045169444 ORIGIN LATITUDE=31.7343936111 FALSE EASTING (m)=219529.584 FALSE NORTHING (m)=626907.39 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Israel Grid (Old) | CENTRAL MERIDIAN=35.2120805556 CENTRAL LATITUDE=31.7340972222 FALSE EASTING (m)=170251.55 FALSE NORTHING (m)=126867.91 |
| Japanese Projection System | by zone |
| Kansas Regional Coordinate System (KRCS) | by zone |
| Korea TM | by zone |
| Krovak | |
| Laborde (Madagascar) | |
| Lambert Azimuthal Equal-Area | CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Lambert Conformal Conic | CENTRAL MERIDIAN SCALE FACTOR FIRST STANDARD PARALLEL SECOND STANDARD PARALLEL CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Lambert Cylindrical Equal-Area | CENTRAL MERIDIAN TRUE SCALE LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Lambert (Marta Software) | CENTRAL MERIDIAN |
| Lambert (NOAA Port) | CENTRAL MERIDIAN CENTRAL LATITUDE |
| Lambert I Carto (Northern France) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=48.5985228 SECOND STANDARD PARALLEL=50.3959117 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=49.5 FALSE EASTING (m)=600000 FALSE NORTHING (m)=1200000 |
| Lambert I Nord (Northern France) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=48.5985228 SECOND STANDARD PARALLEL=50.3959117 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=49.5 FALSE EASTING (m)=600000 FALSE NORTHING (m)=200000 |
| Lambert II Centre (Central France) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=45.8989389 SECOND STANDARD PARALLEL=47.6960144 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=46.8 FALSE EASTING (m)=600000 FALSE NORTHING (m)=200000 |
| Lambert II Carto Étendu (Wide) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=45.8989189 SECOND STANDARD PARALLEL=47.6960144 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=46.8 FALSE EASTING (m)=600000 FALSE NORTHING (m)=2200000 |
| Lambert III Carto (Southern France) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=43.1992914 SECOND STANDARD PARALLEL=44.9960939 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=44.1 FALSE EASTING (m)=600000 FALSE NORTHING (m)=3200000 |
| Lambert III Sud (Southern France) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=43.1992914 SECOND STANDARD PARALLEL=44.9960939 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=44.1 FALSE EASTING (m)=600000 FALSE NORTHING (m)=200000 |
| Lambert IV Carto (Corsica) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=41.5603878 SECOND STANDARD PARALLEL=42.7676633 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=42.165 FALSE EASTING (m)=234.358 FALSE NORTHING (m)=4185861.369 |
| Lambert IV Corse (Corsica) | CENTRAL MERIDIAN SCALE FACTOR=1 FIRST STANDARD PARALLEL=41.5603878 SECOND STANDARD PARALLEL=42.7676633 CENTRAL MERIDIAN=2.33722917 ORIGIN LATITUDE=42.165 FALSE EASTING (m)=234.358 FALSE NORTHING (m)=185861.369 |
| Lambert-93 | by zone |
| Marta Software Satellite | CENTRAL MERIDIAN |
| Mercator | CENTRAL MERIDIAN SCALE FACTOR CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Mercator (Lowrance Special) | |
| Mercator (Navionics Special) | |
| MGA (Map Grid of Australia) | by zone |
| Michigan Georef | PROJECTION CENTER SCALE FACTOR=1 AZIMUTH ANGLE=337.25556 AZIMUTH PT (CENTRAL LONGITUDE)=-86 ORIGIN LATITUDE=45.3091667 FALSE EASTING (m)=499839.834 FALSE NORTHING (m)=528600.24 |
| Miller Cylindrical | CENTRAL MERIDIAN FALSE EASTING (m) FALSE NORTHING (m) |
| Miller Oblated Stereographic | |
| Minnesota County | by zone |
| Mollweide | CENTRAL MERIDIAN FALSE EASTING (m) FALSE NORTHING (m) |
| MSTM (Mississippi Transverse Mercator | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=-89.75 ORIGIN LATITUDE=32.5 FALSE EASTING (m)=500000 FALSE NORTHING (m)=1300000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| MTM (Eastern Canada) | by zone |
| Natural Earth | CENTRAL MERIDIAN FALSE EASTING (m) FALSE NORTHING (m) |
| New Brunswick Double Stereographic | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL LONGITUDE=-66.5 CENTRAL LATITUDE=46.5 FALSE EASTING (m)=2500000 FALSE NORTHING (m)=7500000 |
| Norwegian Transverse Mercator (NTM) | by zone |
| New Zealand Map Grid | |
| New Zealand Transverse Mercator 2000 | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=173 ORIGIN LATITUDE=0 FALSE EASTING (m)=1600000 FALSE NORTHING (m)=10000000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Oblique Stereographic | CENTRAL MERIDIAN SCALE FACTOR CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Orthographic | CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Philippines Grid | by zone |
| Plate Carree (Geographic) | CENTRAL LONGITUDE=0 |
| Poland 1992/19 | CENTRAL MERIDIAN SCALE FACTOR=0.999 CENTRAL MERIDIAN=19 ORIGIN LATITUDE=0 FALSE EASTING (m)=500000 FALSE NORTHING (m)=-5300000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Poland 2000 | by zone |
| Polar Stereographic | LONGITUDE POLE TRUE SCALE LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Polyconic | CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Robinson | CENTRAL MERIDIAN FALSE EASTING (m) FALSE NORTHING (m) |
| Rectified Skew Orthomorphic (RSO) | PROJECTION CENTER SCALE FACTOR AZIMUTH ANGLE AZIMUTH PT (CENTRAL LONGITUDE) ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| RSO East Malaysia (Borneo) | PROJECTION CENTER SCALE FACTOR=1 AZIMUTH ANGLE=53.31580995 AZIMUTH PT (CENTRAL LONGITUDE)=115 ORIGIN LATITUDE=4 FALSE EASTING (m)=0 FALSE NORTHING (m)=0 |
| RSO West Malaysia (Peninsular) | PROJECTION CENTER SCALE FACTOR=1 AZIMUTH ANGLE=323.0257964667 AZIMUTH PT (CENTRAL LONGITUDE)=102.25 ORIGIN LATITUDE=4 FALSE EASTING (m)=804671 FALSE NORTHING (m)=0 |
| Sinusoidal | CENTRAL MERIDIAN FALSE EASTING (m) FALSE NORTHING (m) |
| Sinusoidal (Integerized) | CENTRAL MERIDIAN FALSE EASTING (m) FALSE NORTHING (m) |
| State Plane Coordinate System (NAD27) |
by zone
STATE PLANE SCALE FACTOR EXTRA FALSE EASTING (m) EXTRA FALSE NORTHING (m) EXTRA SCALE CENTER EASTING (m) EXTRA SCALE CENTER NORTHING (m) *The extra State Plane parameters allow for some modification of the State Plane projections to relate to a ground grid. This is an older method of projection modification, and the extra parameters are only supported in the old (original) PRJ format, not in the newer OGC WKT PRJ format. Not all software supports the older PRJ format to recognize these extra parameters. For access to a full custom projection definition based on/ starting from the state plane parameters, select the state plane projection, then switch to the base method (Transverse Mercator or Lambert Conformal Conic) and the matching values will be carried over to the configurable custom projection. |
| State Plane Coordinate System (NAD83) |
by zone
STATE PLANE SCALE FACTOR EXTRA FALSE EASTING (m) EXTRA FALSE NORTHING (m) EXTRA SCALE CENTER EASTING (m) EXTRA SCALE CENTER NORTHING (m) *The extra State Plane parameters allow for some modification of the State Plane projections to relate to a ground grid. This is an older method of projection modification, and the extra parameters are only supported in the old (original) PRJ format, not in the newer OGC WKT PRJ format. Not all software supports the older PRJ format to recognize these extra parameters. For access to a full custom projection definition based on/ starting from the state plane parameters, select the state plane projection, then switch to the base method (Transverse Mercator or Lambert Conformal Conic) and the matching values will be carried over to the configurable custom projection. |
| Stereo70 | |
| Stereographic | CENTRAL MERIDIAN SCALE FACTOR CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Swedish Grid (RT90) | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=15.8082777778 ORIGIN LATITUDE=0 FALSE EASTING (m)=1500000 FALSE NORTHING (m)=0 ROTATION ANGLE (ABOUT ORIGIN)=0 |
| Swedish Grid (SWEREF99) | by zone |
| Swiss Grid | PROJECTION CENTER SCALE FACTOR=1 AZIMUTH ANGLE=90 AZIMUTH PT (CENTRAL LONGITUDE)=7.4395833333 ORIGIN LATITUDE=46.9524055556 FALSE EASTING (m)=600000 FALSE NORTHING (m)=200000 |
| Swiss Grid (LV95) | PROJECTION CENTER SCALE FACTOR=1 AZIMUTH ANGLE=90 AZIMUTH PT (CENTRAL LONGITUDE)=7.4395833333 ORIGIN LATITUDE=46.9524055556 FALSE EASTING (m)=2600000 FALSE NORTHING (m)=1200000 |
| System 1965 (Uklad 1965) [Poland] | by zone |
| Times | CENTRAL MERIDIAN |
| Transverse Mercator | CENTRAL MERIDIAN SCALE FACTOR CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Transverse Mercator (South-Orientated) | CENTRAL MERIDIAN SCALE FACTOR CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) ROTATION ANGLE (ABOUT ORIGIN) |
| Trinidad Grid | CENTRAL MERIDIAN=-61.333333333 CENTRAL LATITUDE=10.4416666667 FALSE EASTING (m)=86501.464 FALSE NORTHING (m)=65379.013 |
| Two Point Equidistant | LATITUDE 1 LATITUDE 2 LONGITUDE 1 LONGITUDE 2 FALSE EASTING (m) FALSE NORTHING (m) |
| UPS North (Univ. Polar Stereographic) | CENTRAL MERIDIAN SCALE FACTOR=0.994 CENTRAL LONGITUDE=0 CENTRAL LATITUDE=90 FALSE EASTING (m)=2000000 FALSE NORTHING (m)=2000000 |
| UPS South (Univ. Polar Stereographic) | CENTRAL MERIDIAN SCALE FACTOR=0.994 CENTRAL LONGITUDE=0 CENTRAL LATITUDE=-90 FALSE EASTING (m)=2000000 FALSE NORTHING (m)=2000000 |
| UTM | by zone |
| UTM (Italia) | by zone |
| Van der Grinten | CENTRAL MERIDIAN ORIGIN LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Vertical Near-Side Perspective | HEIGHT OF PERSPECTIVE POINT CENTRAL LONGITUDE CENTRAL LATITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Wagner VII (Hammer-Wagner) | CENTRAL LONGITUDE FALSE EASTING (m) FALSE NORTHING (m) |
| Winkel I | CENTRAL LONGITUDE TRUE SCALE LATITUDE |
| Winkel Tripel | CENTRAL LONGITUDE TRUE SCALE LATITUDE |
| Wisconsin County Reference System (WISCRS) | by zone |
| WTM83/91 (Wisc Transverse Mercator) | CENTRAL MERIDIAN SCALE FACTOR=1 CENTRAL MERIDIAN=-90 ORIGIN LATITUDE=0 FALSE EASTING (m)=520000 FALSE NORTHING (m)=-4480000 ROTATION ANGLE (ABOUT ORIGIN)=0 |
Planar Units
The following linear units are supported:
- Meters
- Feet (U.S. Survey)
- Feet (International)
- Nautical Miles
- Miles (US Survey)
- Centimeters
- Millimeters
- Kilometers
- Yards
- Indian Yards
- Clarke's Yards
- Sears Yards
- Clarke's Feet
- Cape Feet
- Gold Coast Feet
- Sears Feet
- Inches (US Survey)
- Inches (International)
- Links
- Clarke's Links
- Chains (Benoit)
- Chains (Sears/Gunter)
- British Chains (Sears 1922 Truncated)
- German Legal Meters
The following angular units are supported:
- Arc Degrees
- Arc Seconds
- Radians
- Grades (French Angular Units)