Much of the interaction in 3D can be performed using the mouse and mouse wheel, or keyboard shortcuts. Use the mouse to rotate the view around as well as zoom in, or use the 3D View tools for rotation, moving and zooming described below.
The Rotate operation allows rotating the scene around the current pivot axis, or tilting the scene on an axis that parallels the view window plane, by moving the mouse with the left button down.
Target Camera
The 3D view can be focused on a selected feature or features of interest. To move the pivot axis to the selected features, first select the feature or features with the digtizer tool. Then press the Z key in the 3D window. This will move the pivot axis to the center of the feature(s) and lock it there until a pan action is performed.
Keyboard shortcuts
- To lock along one dimension or the other, press either of the 'V' or 'H' keys. The 'V' modifier (Vertical only) enables tilting but disables rotating around the pivot axis; the 'H' modifier (Horizontal only) disables tilting but enables rotation.
- F11: Decreases the field of view by 5 degrees; if CTRL is held down, it decreases by 1 degree, if SHIFT is held down, it decreases by 10 degrees.
- F12: Increases the field of view by 5 degrees; if CTRL is held down, it increases by 1 degree, if SHIFT is held down, it increases by 10 degrees.
- Z: Sets the pivot point to the selected feature or, if no feature is selected, the cursor location on the terrain in the 3D view.
- P: Enables / disables pivot axis display.
Touch Screen Gestures
- Pinch(two fingers pinching together or moving away): Zoom in and out
- Two finger swipe (Press and drag with two fingers) : Pan the 3D view
- One finger drag : Rotate the view
Using
the Zoom tools
The zoom in and out buttons will zoom
in or out on the center of the 3D view.
- The arrow keys and numeric keypad can also be used to pan and zoom the 3D image without using the mouse.
- PgUp and PgDn will zoom in and out.
Walk Mode
This setting switches the navigation control to a 'walk mode'. Left-click and drag back to pan the view back; left-click and drag forward to move the view forward.
The default Walk Mode height may be set in the 3D View Configuration dialog.
With Walk Mode enabled, checking the You are Here button will display a GPS vessel icon in the 2d map view indicating your current viewing location within the 3d viewer.
Keyboard Shortcuts
- Pressing the Ctrl+W key will activate Walk mode in the 3D view.
- Left and Right arrows or Left-click and drag to pan.
- Use the 'Pg Up' and 'Pg Dn' buttons, right-click and drag, or the mouse wheel to adjust the Walk Mode height.
-
Up and Down arrows to move forward and back
- Hold the mouse wheel and move up and down to change the Walk Mode pitch.
Fly Mode
Fly Mode is a navigation mode that adds first-person camera view, and free navigation in all directions without being tied to the terrain. Left-click and drag to look around. Use the up and down arrow keys to move forward and backwards.
Keyboard shortcuts
- J : Enable and Disable Fly Mode
- Up and Down arrows: move forward and back